How much trouble to send me an info source for the details of the 
procedure?  What is the wavelength range used.? I may need a different 
photomultiplier or source tube  and filter setup for my ancient Spec. 20. 
 Can you give me a source for the details of the technique?
James Osbourne Holmes
[email protected]


-----Original Message-----
From:   Marshall Dudley [SMTP:[email protected]]
Sent:   Thursday, October 28, 1999 11:22 AM
To:     [email protected]
Subject:        Re: CS>diagram/design

You need a uv/vis scanning spectorphotometer.  As the particles get bigger 
the absorption band
wavelength gets longer.  We use a Hack unit here for that.  Unfortunately 
we have no way of calibrating
it, so we cannot look at the spectrum and say the particles are such and 
such a size, all we can do is
say that the particles in this batch are bigger or smaller than that, or 
that the particle size matches
those in which the tests showed the highest effectiveness.  If we could get 
samples that have been sized
already by SEM or other means, we could calibrate it and then do a pretty 
good job of absolute sizing,
but we have yet to be able to find such standards.

Marshall

James Osbourne, Holmes wrote:

> HI Marshall,
>
> Can you explain how spectrophotometry can be used to indicate particle 
size in the 1 to 10 nm range?
>
> They keep telling me It can't be done, at Spectronics.
> James Osbourne Holmes
> [email protected]
>
> -----Original Message-----
> From:   Marshall Dudley [SMTP:[email protected]]
> Sent:   Thursday, October 28, 1999 9:43 AM
> To:     [email protected]
> Subject:        Re: CS>diagram/design
>
> Ivan Anderson wrote:
>
> > As far as I know EM and spectrophotometry will not differentiate
> > between charged and uncharged particles.
> >
> > Ivan.
>
> Uncharged particle will tend to aggregate very rapidly, and
> spectorphotometry will show the difference in particle size.  I believe
> there is therotical basis for there being a difference depending on 
charge
> as well, but I will have to hit the references on that one to be sure.
>
> Marshall
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected]  -or-  [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
>
> List maintainer: Mike Devour <[email protected]>