Example: CS resistance = 20,000 or 20Kohms
Resistance should be Ohms x 10,000 not 1,000
1. Go to the number 2 (20K / 10K = 2) slide your finger to the right, you
should end up between 210 and 240 minutes.
2. From there, slide your finger up until you intersect the lower curve
marked ppm.
3. From there, slide your finger to the left.
You should end up between 12 and 14, which is 13ppm.
Technically, the solid dots are the measured ppm values. I think the
curves represent an average.? Ivan?
Starting from step 2: If you slide you finger up to the solid dot in stead
of the ppm
curve you end up with 15 ppm.
solid dots - measured ppm
circles - measured/calculated CS resistance
squares - measured conductivity
BillH
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
List maintainer: Mike Devour <[email protected]>
