Phil, The fact that you got the reading you did without putting it into water of any kind indicates that the unit is faulty. If it's not in water, it should read zero. Did you go to the link that I suggested? https://theartofmakingcolloidalsilver.com/measure-it/
I have tried my best on that page to impart apologize can on the subject of the measurement of the PPM of the ionic portion of colloidal silver. Better called EIS. If I can improve the page, please tell me how. Arnold -----Original Message----- From: PT Ferrance <[email protected]> Sent: Wednesday, November 4, 2020 1:40 PM To: [email protected] Subject: Re: CS>TDS meter Wow! Are all your posts this inaccurate and critical? I've never heard of you before yet you tell me my thinking is flawed? Didn't anyone every teach you manners??? And don't think you can send me another personal email because I just blocked you! PT On Wednesday, November 4, 2020, 04:32:15 PM EST, Ed <[email protected]> wrote: PT: There is no meter available to measure CS strength. All you learn from a TDS meter is that you have something. You should have tested your good meter in a sample of distilled water, reading would be 0-1 when you actually do the test. Its seems you looked at the reading when turning on your meter, and not with a substance in between the test points. Try testing the distilled water before saying you have a bad meter please. Your reports on Rife devices have this same flaw in thinking- and your report they have a problem when in essence they don't. To make sure you understand, you need to send your product to a lab that does measure the strength of what you call EIS, most of us keep it simple and call it CS. This testing is very expensive. Your ppm test only tells you that you have something, but has nothing to do with quality or quantity of CS On 11/4/2020 1:17 PM, PT Ferrance wrote: > > Thank you. I am just looking for a way to measure the strength (ppm) of the > EIS that I make. > PT > > > > > > > > > On Tuesday, November 3, 2020, 06:00:54 PM EST, Phil Morrison > <[email protected]> wrote: > > > > > > > There are many meters and ways to measure water conductivity. Once you have > a reading with one meter, that reading is easily converted to reading in any > other measurement system. > > https://www.lenntech.com/calculators/conductivity/tds_engels.htm > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:[email protected]?subjectArchives: > http://www.mail-archive.com/[email protected]/maillist.html > > Off-Topic discussions: <mailto:[email protected]> > List Owner: Mike Devour <mailto:[email protected]> > > > >
