----- Original Message ----- From: Lee <[email protected]> > So Chuck or anyone, what is that "recipe and time window for the 3 > battery system?" I am using 12 oz dw plus 2 oz seed for a total of > 14oz, silver wires one inch apart and about 3-3 1/2 inches submerged, a > stirrer and dmm and stop when I reach 4- 4.5 on the meter measurement of > current/per Ole Bob. The time seems to vary with the temperature and > which dw I use and for other reasons I can not determine. My run times > have gone from 1 and 1/2 hr to 2 and 1/2hrs. Any thoughts or comments?
Are you keeping an eye on your voltage? I would suggest you double the gap between your electrodes, you may find more consistency. The condition of your seed CS will also have an effect on the batch. Not only the concentration of the seed, but the particle size etc. To achieve 4 - 4.5 mA implies a high concentration if you have mecanical stirring, but it is hard for me to guage. Perhaps when you finish your next batch, you could shorten your wetted electrode depth to 2 inches and width between them also to 2 inches and report the current and voltage of that arrangement... may be able to be a little more specific then. Ivan. > My Tyndall's are getting stronger of late and I don't know why. > sparkles are far and few between. Isn't stirring supposed to keep > particle size down? > > Would love comments on all this. > Lee > > > > > > > Charles King wrote: > > > > On Sat, 13 Nov 1999 02:05:03 EST, [email protected] wrote: > > > > >> My criteria is a clear to golden brew with a metallic taste that shows > > >> tyndall > > >> without sparklies. > > >What is tyndall (only explain in terms a newbie can understand)? Is it > > >something I can detect without fancy equipment? > > >Nellie > > > > Tyndall effect is being able to see a narrow beam of light as it is shone > > through your solution. > > Most of us have used the, now inexpensive, laser pointers purchased at novelty > > stores, flea markets, etc. Don't pay more than $10 for one. > > > > Use it on your distilled water before a run, and you will feel a bit more > > confident about your water (no tyndall). > > > > Then try it during and after your run. If you see tyndall, great. If you see > > it sharply, great. If you see sparkles in the beam, uh, oh. Sparkles mean large > > particles or clumps. Not desireable, cut back on your run time. > > > > None of this is really necessary if you follow the recipe and time window for > > the 3 battery system. It's just a fun thing to increase confidence in your > > product. > > Chuck > > Every time I find out the meaning of life, they change it > > > > -- > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > To join or quit silver-list or silver-digest send an e-mail message to: > > [email protected] -or- [email protected] > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > To post, address your message to: [email protected] > > > > List maintainer: Mike Devour <[email protected]> > > -- > *To reply to author please remove "Xitout" from the address. > This is done to prevent SPAM. >

