Hi Bil,
that is exciting -- I would love to limit the current on my pulser.
So do I buy a resistor at Radio Shack? and what exactly do I ask for?
Then once I have it I just cut the wires and strip them a little and then I
can wire in both the meter and the resistor? Can I wire the resistor to the
meter and then the outside two wires to the pulser lead and the one to the
electrode?

I think I'm going to get all this stuff and start experimenting soon.

Thanks for your help.
Take care,
katarina

> Date: Sun, 21 Nov 1999 21:02:02 -0800
> From: "2001 TV  VCR" <[email protected]>
> To: <[email protected]>
> Subject: Re: CS>METERS & Current Limiting
> Message-ID: <008e01bf34b7$069ee780$8dd4d...@x2001>
> Content-Type: text/plain;
>  charset="iso-8859-1"
> Content-Transfer-Encoding: 7bit
>
> To Jeff and all,
>
> The output of the Bob Beck approved pulsers/
> CS makers is 27 VDC (pure DC, no pulsing) if
> you use the correct jack (CS).
>
> To limit the current to a maximum of 2 to 3 mA
> (depends on how strong you make the CS)
> when using 27 or 30 VDC just wire a 8200 ohm
> resistor (any wattage will do) in series with one
> of the leads going to the silver.
>
> Don't worry about cutting one of the wires to
> wire in the resistor and your meter (mA scale).
> This will not affect the operation in any way
> other than to limit the current (resistor).  The
> benefits far outweigh the slight damage (change
> of appearance!).
>
> If you still have questions let me know.
> Good luck,
>
> Bil


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>