should have added that i have a whole house hydro quad purifier for my water system which is rated 99 .9% pure and an extra filtering unit under the sink. do i need something to measure the purity of the water and if so where do i buy it? and what? brenda b. Yahoo ID b29651 IM b29651 ICQ# 25804617 -----Original Message----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Date: Tuesday, November 30, 1999 12:15 PM Subject: Re: CS>TDS
>where can i purchase the TDs meter please? >brenda b. >Yahoo ID b29651 >IM b29651 >ICQ# 25804617 >-----Original Message----- >From: James Osbourne, Holmes <[email protected]> >To: '[email protected]' <[email protected]> >Date: Tuesday, November 30, 1999 11:01 AM >Subject: RE: CS>TDS > > >>You may buy a still, or buy distilled water. The water which I have found >>best here in Santa Fe New Mexico is "Arrowhead". With my Sprite 6000 >>meter, it has always tested 0.0 TDS. That however, is not conductive >>enough. I have made up a solution of baking soda [sodium hydrogen >>carbonate or sodium bicarbonate] and add enough of that to get the >>conductivity up to 0.8 PPM. It would be better to speak directly in mS, >>because that eliminates the variable of how the TDS is calibrated. I don't >>know if this is generally true, but the Arrowhead distributor here is the >>Coca Cola Company. >> >>A conductivity meter is the first tool one should get after getting almost >>any generator. >> >>James Osbourne Holmes >>[email protected] >> >> >>-----Original Message----- >>From: aka Jhon [SMTP:[email protected]] >>Sent: Monday, November 29, 1999 4:57 PM >>To: [email protected] >>Subject: Re: CS>TDS >> >> Where do you get pure water from, if this is true??? >> >>----- Original Message ----- >>From: James Osbourne, Holmes <[email protected]> >>To: <[email protected]> >>Sent: Monday, November 29, 1999 3:53 PM >>Subject: RE: CS>TDS >> >> >>> The TDS meter measures conductivity of the water. It is calibrated with >>> ---usually NaCl. Different solutes have different conductivity, but it >>is >>> usually close enough. If you deal in mS you eliminate that variation. >>> >>> What I as pointing out is that it is unlikely that home or commercial RO >>> water is pure enough i.e., low enough conductivity for CS generation. >>> >>> One local commercial RO water I measured was 4.+ PPM. Typically the >>> rejection rates are about 95%. My incoming water is 240 PPM, so do the >>> math. Same for your water. >>> >>> James Osbourne Holmes >>> [email protected] >>> >>> >>> -----Original Message----- >>> From: D G [SMTP:[email protected]] >>> Sent: Monday, November 29, 1999 12:45 PM >>> To: [email protected] >>> Subject: RE: CS>TDS >>> >>> << Message: RE: CS>TDS >> but i thought the the TDS meter was to test >>the >>> purity of their system's >>> water for cs production?! >>> hmmmm >>> >>> Dennis >>> >>> 51/50 >>> 24/7 >>> >>> >>> >>> -- >>> The silver-list is a moderated forum for discussion of colloidal silver. >>> >>> To join or quit silver-list or silver-digest send an e-mail message to: >>> [email protected] -or- [email protected] >>> with the word subscribe or unsubscribe in the SUBJECT line. >>> >>> To post, address your message to: [email protected] >>> Silver-list archive: http://escribe.com/health/thesilverlist/index.html >>> List maintainer: Mike Devour <[email protected]> >>> >> >> > >

