Katarina,

If I remember correctly he said that boiling
water will help produce the smallest particle
size.  This conflicts with what Marshall said.

Russ, from Sota Instruments claims to have
sent the CS which they made using method
to a lab for testing.  He said that photo of
the CS (made using an electron microscope)
showed that the particle size was very small.
The small size that so many people refer
to in fractions of a micron (.001 to .015?
microns I believe).

So who is right?  Marshall seems to know more
about chemistry, etc. so I will follow his advice
for now.

Bil





----- Original Message -----
From: Katarina Wittich <[email protected]>
To: 2001 TV VCR <[email protected]>
Sent: Wednesday, December 01, 1999 10:28 AM
Subject: Re: Boiling water Special Glass


> Hey Bil,
> do you know why he said it was so important?
> Thanks,
> Katarina
>
>
> > Hi Katarina,
> >
> > I was told by the owner of Sota Instruments,
> > maker of the Silver Pulser (and an associate
> > of Bob Beck), that boiling the water is
> > important to make good quality CS.
> >
> > Marshall has just informed me that hot water
> > causes larger particle size.  I am going to
> > play it safe for now and use cold water.
> >
> > You can buy a "glass" pot made of Corning
> > Ware at stores that carry a large variety of
> > pot and pans.  It is actually not glass but an
> > alloy of glass and many metals.  It looks and
> > feels just like glass (transparent brown).
> >
> > Corning say that you can run it under cold
> > water when it is extremely hot and it will not
> > crack.  I use a Pyrex pot (by Corning).  Not
> > near as heat resistant buy so far it has not
> > cracked.
> >
> > Bil
> >
> >
> >
> > ----- Original Message -----
> > From: Katarina Wittich <[email protected]>
> > To: <[email protected]>
> > Sent: Tuesday, November 30, 1999 8:36 AM
> > Subject: CS>Re: Bil, boiling water.
> >
> >
> >> Hi Bil,
> >> so , I have two questions.
> >> Doesn't heating the water increase particle size? As the particles bump
> > into
> >> each other and agglomerate and make cs faster but bigger particles?
> >>
> >> And how do you boil water in a glass jar without it breaking? What kind
of
> >> jar? I looked for glass kettles in the store but didn't find anything.
> >> Thanks,
> >> katarina
> >>
> >>
> >> > I have been making CS for some time.  I started out
> >> > with a 16 oz. jar and was told to use boiling hot
> >> > distilled water and no salt to have the smallest particle
> >> > size.
> >> >
> >> > Now I use a gallon jar.  The distilled water I buy here
> >> > in California always tests below 2 ppm.  I boil the
> >> > water in a very clean glass pot.  If I use cold water the
> >> > CS process takes forever.  Also no matter how much
> >> > I limit the current (as low as 2 mA) the cathode always
> >> > gets very thick with sludge.  This is my setup:
> >> >
> >> > One gallon glass jar (clean)
> >> > Plastic lid
> >> > 99.99% silver, 1" x 3.5" (wetted)
> >> > Food grade stainless steel, 1" x 8" (wetted)
> >> > Stainless steel bolts and nuts (on lid)
> >> > Electrodes spaced 1/2" apart
> >> > 30 volts DC
> >> >
> >> > Some of you guys are using 120 volts AC rectified and
> >> > filtered to produce ~170 volts DC.  How much current
> >> > are you running?  What is the advantage?
> >> >
> >> > Is it possible to make 5 or 10 ppm CS by the gallon
> >> > without the sludge using low voltage?
> >> >
> >> > Thank you very much for your replies.
> >> >
> >> > Bil
> >> >
> >>
> >>
> >> --
> >> The silver-list is a moderated forum for discussion of colloidal
silver.
> >>
> >> To join or quit silver-list or silver-digest send an e-mail message to:
> >> [email protected]  -or-  [email protected]
> >> with the word subscribe or unsubscribe in the SUBJECT line.
> >>
> >> To post, address your message to: [email protected]
> >> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> >> List maintainer: Mike Devour <[email protected]>
> >>
> >
>