To All Listers:
   I need some help...actually a co-worker does.  He is 66 yrs. old and has
had laryngitis (sp?) for about 3-4 wks.  Yesterday after his Dr. visit he
told me that they found a lump/tumor in his lung and they are about 99 %
sure it is cancer.  He used to smoke heavily (3-5 packs/day) for at least 20
yrs.  And to complicate matters he has done a LOT of work with asbestos
while he was in the Navy.  Even as far as to use a sheet of asbestos
insulation for a blanket many times.
      >>>>>>>>>>>  My question is.......
  Do any of you know if this nebulizer set up would benefit him?  I've told
him about IP-6 and some of the other 'cancer-killers'.  Having just read
about this nebulizer and breathing it directly into the lungs made me
wonder.
   All comments appreciated.
Thanx,      W.T.
----- Original Message -----
From: 2001 TV VCR <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Saturday, December 04, 1999 4:42 AM
Subject: Re: CS>Nebulizer Instructions


> Katarina,
>
> Thank you for posting the instructions for such
> a helpful low cost instrument.  Have you (or
> anyone else out there) heard of other uses for
> this device (the nebulizer {using an airbrush} )
> for applying CS to the lungs.
>
> How about for chestcolds, coughs, to help the
> lungs before or after quitting smoking?
>
> Bil
>
>
>
> ----- Original Message -----
> From: Katarina Wittich <[email protected]>
> To: Silver A <[email protected]>
> Sent: Wednesday, December 01, 1999 2:10 PM
> Subject: CS>Nebulizer Instructions
>
>
> > Dear List members,
> > Here are Brooks' complete instructions for making a nebulizer.
> > In the future we can tell people to do a search for Nebulizer
instructions
> > in the archives.
> > Katarina
> >
> >
> >
> >
> > > From: Brooks Bradley <[email protected]>
> > > To: [email protected] <[email protected]>
> > > Date: Friday, April 23, 1999 10:45 PM
> > > Subject: New Experimental CS X Oxygen Protocol For Unresponsive
> > > Pulmonary Pathogens
> > >
> > >
> > > To all interested list members,
> > >
> > > I would like to relate an experimental protocol recently developed by
> > > one of our younger (and brighter) staff members. He originated the
> > > idea and assembled all parts into a working model in less than two
> > > days-------after his original inspiration.
> > >
> > > The original problem manifested as a result of our fruitless search
> > > for some effective procedure for attacking the bi-lateral form of
> > > those bacterial pneumonias which have proved non-responsive to all of
> > > the anti-biotic protocols.  This challenge has been especially dear
> > > to our hearts since one of our engineers lost his 47 year old wife (a
> > > wonderful school teacher), at the age of 47--------nine years ago.
> > >
> > > We have used this system on 3 volunteers----and this only----within
> > > the past four weeks.  However, we have been absolutely astounded by
> > > the results.
> > >
> > > One 75 year old ashma sufferer, unable to gain more than momentary
> > > relief during the past 8 years, was able to dispense with his very
> > > labor-intensive (unbelieveably costly) hospice-assisted protocols
> > > ............ 18 days after undertaking this protocol. We now suspect
> > > that his ashma was the result of some form of secondary bacterial
> > > pathogen......this because of the speed and degree of his recovery.
> > >
> > > Another of our volunteers (71 years), afflicted with a sub-clinical
> > > bronchial infection-----non-responsive to any protocol----including
> > > Rife Beam Ray Therapy, has improved by at least 75% within the past 21
> > > days.........and shows every indication of complete resolution within
> > > the next week or so.  This volunteer was in perfect health in every
> > > other way----except for the bronchial disorder (complicated by a
> > > minor but persistant post-nasal drainage)
> > >
> > > The third volunteer was an 81 year old male, completely
> > > non-responsive to all therapies for bi-lateral pneumonia of a
> > > bacterial nature.  This condition had persisted for 6 months and he
> > > was approaching a moribund state, very rapidly.
> > >
> > > 24 hours after beginning this protocol, he encountered a very serious
> > > crisis evolving from major Herxheimer's Reaction.  Pustule formation
> > > was so rapid and intense,  100% oxygen support was required----and
> > > the treatment protocol was suspended for two days, while the
> > > volunteer's condition was stabilized.
> > >
> > > Two days after resumption of the Oxygen-CS  protocol, no supporting
> > > O2 therapy was required as the subject was fully able to breathe
> > > adequately unassisted.  The volume of sputum/pus fluid was massive.
> > >
> > > Excepting very sore chest area (from prolonged coughing)  the
> > > volunteer was much improved.  Within five days he became very alert
> > > and began to overcome his narcoleptic tendencies.  Within ten days he
> > > became ambulatory again. Within 15 days his lungs were unobstructed
> > > enough he could breathe fully, with no audio evidence of fluid
> > > presence in the pulmonary tract.  Yesterday (the 21st day) his lungs
> > > checked to be 90% clear, with only one tiny spot in the lower left
> > > quadrant of the left lung.
> > >
> > > His M.D. pulmonary specialist is in a state of "schock" over the
> > > developments.  His analysis is this is the most pronounced case of
> > > "spontaneous remission" in his 30 years of practice.  No one has
> > > informed the M.D. of our experimental protocols, used on this
> > > volunteer.  Our volunteer's immediate family is so irate over the
> > > fact that his alleopathic pulmonary "team" was totally unable to
> > > reverse his decline toward immediate life-departure (the crisis
> > > management team did offer to place him on 100% life support until
> > > clinical death)  they wanted  to instigate some form of legal action.
> > >
> > > We reminded them of their earlier agreement with us, that regardless
> > > of the outcome of our experimental protocol, "neither the procedural
> > > result nor the protocol itself, would be broached with the
> > > volunteer's alleopathic counsel".
> > >
> > > Additionally, based upon the anecdotal nature of this one case, there
> > > is no way to prove efficacy.
> > >
> > > THE PROTOCOL:   This consists simply of using a nebulizing system
> > > constructed from a conventional artist's air-brush assembly, with
> > > modified pneumatic plumbing facilitating its connection to a
> > > pressure-regulated pure O2 supply.  The air-brush mechanism was
> > > chosen because it provides an exeptionally economcal means of
> > > furnishing a very small particle aerosol fog (4 micron vicinity).
> > >
> > > Using a very simple adapter from the air-brush pressure regulator,
> > > to the O2 supply hose coupling, plus a standard welding system size
> > > oxygen fitting (female), the assembly is connected directly to the
> > > Oxygen port outlet from either a small medical-type O2 bottle---or a
> > > standard welding system O2 bottle outlet (they both contain the same
> > > purity oxygen).
> > >
> > > Using the small fluid-supply bottle which comes in the air-brush kit,
> > > then filling the supply bottle approximately 3/4ths full (about 1/2
> > > ounce) of 5 ppm CS, we were ready to start. The O2 system (we used
> > > two-stage regulators) was SLOWLY set for constant regulation at 35
> > > psi, at which point the system was ready for use.
> > >
> > > We placed the air-brush in the hand of the volunteer, who in turn
> > > pressed the push-valve button when they wanted to direct the O2/CS
> > > fog mixture into their mouth-----and inhale directly into the
> > > pulmonary system. At the end of each inhalation, the volunteer simply
> > > released pressure on the button and shortly exhaled. This procedure
> > > was repeated until the entire contents of the air-brush supply bottle
> > > was below the intake point of the supply-siphon tube (about 50-75
> > > breaths total). This protocol was employed twice daily (24 hours) for
> > > the entire duration of these researches.
> > >
> > > I will post the bill-of-materials, plus assembly details in another
> > > post sometime tomorrow.  However, as a word of encouragement for
> > > those unable to afford the $680.00 for a hospital-type nebulizer,
> > > the total cost of our assembly, less the oxygen bottle and regulator,
> > > was less than $20.00. Additionally, our particle size was BETTER from
> > > the $10.85 Taiwanese bargain air brush than from our $680.00
> > > hospital-grade nebulizer (at least our measurements indicated so).
> > >
> > > I will also, tell you where you can purchase these air-brush kits. We
> > > have already purchased 20 of them, outfitted them, and given them to
> > > very needy Experimental Volunteers of a charity nature.
> > >
> > > Within the next 8 weeks, we should have some useable "raw" data,
> > > which  I will attempt to share with interested list members.   Please
> > > forgive this lengthy post, but my excitement over this exceptionally
> > > low-cost----and promising protocol, has been keeping me awake
> > > nights......lately. May you all be well.
> > >
> > > Sincerely,
> > >
> > > Brooks Bradley.
> >
> > ----- Original Message -----
> > From: Brooks Bradley <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, 25 April 1999 10:12
> > Subject: CS>Parts List and Comments on CSXO2 Nebulizing System
> >
> >
> >                 Good Afternoon List Members.
> >         Following is a list of the components required for enabling
> > the protocol we used in the experimental researches I outlined last
> > evening.
> >         The air-brush kit we used, was obtained from a mail-order
> > concern specializing in myriad hardware/electrical/hand-tool items.
> > Their quality is toward the low-end industrial, but quite adequate for
> > the home/hobby user.  Our machine shop/proto-type builders have used
> > them for years.  The company is Harbor Freight, located in Camarillo,
> > California.  They now have outlets in one or two other cities.  We
> > obtained our air-brush kits from the Fort Worth, Texas store (we are
> > located in Fort Worth).  The stock number is #6131.  Our purchasing
> > person informed me this item cost us less than $10.00 each, and the
> > last 20 purchased cost less than $8.00.  As of last Wednesday, this
> > store still had some of these units.   Included in the kit are two
> > liquid -supply bottles (one 1/2  and one 1 oz), one air hose which
> > couples between the pressure regulator and the air-brush assembly;
> > one air pressure regulator;  and the air-brush assembly itself.   The
> > additional parts required are for a hose assembly which facilitates
> > coupling the input side of the air pressure regulator with the
> > external oxygen supply used to power the nebulizer.
> >                 Note:  PURCHASE BRASS FITTINGS ONLY,  oxygen is the
> > pre-eminent combustion supporter.
> >                All of these components can be obtained from any
> > commercial outlet stocking pneumatic system parts.
> >  This hose assembly includes:
> >                 One 1/4"  Compression X 1/8" Male NPT fitting  (this
> > is very important, for without it you cannot connect the O2 hose to
> > the air-brush pressure regulator)
> >                  One 1/4" Barb X 1/8" NPTF  Fitting
> >                  One  1/4" X 9/16 RH Oxygen Fitting  (will have a barb
> > fitting on one end and the female coupling on the other)
> >                  Approximately  4 feet of any good !/4   I.D.  200+
> > PSI  air hose.  Tell the clerk you are going to use oxygen in the
> > hose.
> >                   Assemble the parts by screwing the Compression
> > fitting into the 1/4" Barb X 1/8" Male NPT fitting.  Do not worry,
> > only one end of the Compression fitting is compatible with the Barb
> > fitting.  Next, insert the barb end of this fitting assemby into the
> > air hose.  Push the hose on until it is jam against the shoulder of
> > the fitting.  Any small, screw or compression-type clamp may be used
> > to add security to the hose/fitting end.  Next, insert the barb end of
> > the  Oxygen fitting into the remaining hose end and secure with any
> > satisfactory clamp.  Your assembly is now complete.   Next, carefully
> > screw the exposed male end of the Compression fitting into the bottom
> > of the air-brush pressure regulator.  Now  connect the small-diameter
> > air-line between the air-brush assembly and the pressure regulator (it
> > is fool-proof, as there is nowhere else this tiny hose can connect).
> >                 Select the small fluid-supply bottle and fill
> > approximately 75-80% of capacity with 5-10 ppm Colloidal Silver and
> > insert the angled tip assembly into the bottom of the air-brush
> > assembly.  You are now ready to connect to your O2 supply and operate.
> >                 Obtain a small medical O2 bottle (anywhere around 1/2
> > to 1 cubic feet capacity) or any size O2   Arc welding system bottle.
> > Be sure to have a Two-stage regulator attached to the O2 bottle.  Now,
> > connect the 9/16" Oxygen-fitting to the O2 outlet from the Two-stage
> > regulator (also foo-proof, as there is nowhere else to connect).  Now
> > SLOWLY open the O2 control knob on the O2 regulator and set the inlet
> > prssure to your nebulizer assembly to a Maximum of 35 Pounds Per
> > Square Inch (PSI).    Next, screw the AIR-BRUSH air pressure
> > regulator control knob (the tiny knob on top of the air pressure
> > regulator) all the way closed..  Now, open the control knob about 2
> > and one-half turns.   Next, trigger the control botton on the
> > Air-brush head until you see a fine fog each time you press down on
> > the
> > button.  The mist is so fine, you may have to hold it against a dark
> > back ground to see it.  You are now ready to go.
> >             Our best results were obtained by the volunteer inserting
> > the discharge nozzle about 1 inch inside their OPEN  mouth and
> > breathing deep---an long---on each inhalation;  holding the breath for
> > a count of 3 or 4 and then executing a complete exhalation.  Ideally,
> > there should be about 1/4" circular clearance around the air-brush
> > head (while inside the mouth), as this provides the optimum venturi
> > action for incorporating air with the O2.  In acute circumstances, the
> > volunteer can close his/her mouth completely around the nozzle and
> > breathe 100% O2------works great.
> >         Remember  NEVER USE PURE OXYGEN NEAR OPEN FLAMES OR
> > COMBUSTIBLE MATERIALS.  To do so would make this protocol quite
> > irrelevant.
> >             Good luck to all, and if you have any questions just post
> > them and I will try to answer.    Sincerely.  Brooks Bradley.     p.s.
> > Any serviceable air-brush assembly could be used.  However, try to
> > obtain one that will yield the smallest size particle possible.
> >
> >
> >
> > ----- Original Message -----
> > From: Brooks Bradley <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, 25 April 1999 11:08
> > Subject: CS>P.S. To CS X O2 Hardware Assembly Instruction Post
> >
> >
> >             Dear List Members.
> >             I failed to include a suggestion, which some may find of
> > critical importance.  If you do not have immediate access to an O2
> > supply, and encounter an EMERGENCY  experiment, you can connect into
> > any available air compressor outlet (however, youmay have to change
> > out the Compressor-side fitting).  To be safe, let the air compressor
> > charge to 35 psi and disconnect it from the power grid.  There will be
> > ample air pressure to execute your protocol.  The air-brush will
> > function quite well to below 20 psi.  Although your air-supply may be
> > contaminated....the alternative to getting CS into the VOLUNTEER
> > animal/pet may a much more grave situation,
> >             We had excellent, but less spectacular results using
> > compressed air as the driving medium in some animal experiments in
> > 1998.......when addressing some serious pulmonary compromises
> > involving felines.
> >                                 Sincerely.   Brooks Bradley.
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected]  -or-  [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>
>
>