Are you wetting the paper? If they aren't wet it won't carry currnent. If they are wet and you got a paper cut on then you must be very unlucky, I don't see how you did it. To test that my unit is working I will hold one of the electrodes in one hand and put the other to my tongue for a second. It is easy to "feel" if you are getting current.
Sharon L. House wrote: > In a recent post I mentioned that had used the Hulda Clark zapper with no > results. Because nothing was happening for me, I began to wonder if I was > getting any current at all as I didn't feel a thing. I used the paper > towels as suggested (although I don't remember reading that they should be > wetted with a saline solution). Then one day, as I was using the unit, I > felt a sharp little ZING on my finger. Like I'd been bitten. I looked at > the finger and found a tiny paper cut. Boy! I sure could feel the current > on that cut! Well, at least I discovered the thing was working after all! > > Sharon > > >You CAN feel the current many times. You do not grasp copper pipes, but > >paper towels which are wrapped around the pipes that have been wetted with a > >saline solution. This provides excellent conductivity throught the skin so > >the current is essentially set by the internal limiting resistor. > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]>

