TO ALL MEMBERS: SOMEONE HAS REMINDED ME THAT I SLIPPED IN THIS MESSAGE. THEREFORE, I WANT TO CORRECT IT TO ENSURE THAT NO ONE IS CONFUSED ABOUT IT.
I AM SORRY ABOUT THE ERROR IN THIS MESSAGE. THE WORD NICKEL SHOULD HAVE READ SILVER (REPEAT SILVER). I hope that i did not confuse anyone on this list, since the term silver was used elsewhere in my message as well as CS and everybody should know by now that this list covers SILVER ONLY and not nickel. Nickel would probably be poisonous, therefore, I certainly would not touch that. Thanks to the one that reminded me of the error and the ones that have provided their comments. I'll be more careful in the future. Gaston =============================================== ----- Message d'origine ----- De : G. Boucher <[email protected]> À : <[email protected]> Envoyé : 1 mai, 2000 11:59 Objet : CS - PPM measurement > Hi to all experts in labs and others that can provide comments: > > I know that PPM measurement is an important > item to all people producing CS. > > FYI - I have a BioGuard Multi-test 1200V (model name) > that I used to check the water in my swimming pool. > This kit performs 5 important pool and Spa tests. > One of these tests is PPM reading. I paid a few > years ago $30.00 Cdn for the kit. The kit comes > with 5 different liquid (reagent) to perform the > various tests. > > If I understand correctly, PPM is a measure of > parts per million in a liquid. (I presume referring > to some sort of metal or material in that liquid). > > I have used this kit to measure PPM in the CS that > I have produced and according to the reading, my > CS would read between 10 - 20 PPM. > The accuracy of the result is +/- 10, due to one drop > of a specific liquid used to test the water represents 10PPM. > It is not very accurate, But I wonder if this would represent > a better picture of PPM in the CS than the TDS-1. > My TDS-1 reads 5 on the digital readout while this > swimming tool kit would read between 10 - 20 PPM. > > My CS is produced using a 30Vdc power supply with > 0 ppm distilled water (heated water to speed up the process) > and using continous stirring. No current limiting used on this > batch and the producing time was for 2hrs. > > What I would like to know from the experienced people dealing > with PPM what comments they could provide about using this crude > test to measure PPM. I know that again it reads a total, but > if you start with (pure nickel) SHOULD HAVE READ WITH GOOD QUALITY SILVER (REPEAT SILVER) and pure distilled water and insert only silver in the water, the final result must be majority silver... > I understand very well that the best measurement is from > a lab. However, it is not practical for many people to carry out > and if this could give them an approximate reading, perhaps that > it may help some of us. > > I would like your recommendation as far as this kit is concerned. > We know enough about TDS-1 now, we should comment only > on this kit if possible to avoid confusion. > > I want to thank the people in advance that will take the time to > provide useful comments. > > Gaston > ================================================ > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
