Do you have a multi-meter capable of measuring milli-Amps? How much water, how far apart are your electrodes? Wetted depth of electrodes? Over.
Ivan. ----- Original Message ----- From: "Frank Gibson" <[email protected]> To: <[email protected]> Sent: Wednesday, 24 May 2000 06:57 Subject: CS>current limiting > i find that its necessary to throw myself to te mercy of you smarter and > more experienced guys (or gals). > a bit back i built my first generator, and recieved encouragement from a > couple of the group. now, with my daily perusal of the list, i feel i > need to change it to make better CS. > i'm using a plug-in-the-wall type of adapter that says it has an output > of 12 volts, and 750 ma. i've measured the output at 17.5 volts, and > have no clue as to the current. > my CS is turning golden within 1 1/2 to 2 hours. i'm using 2 ten inch > lengths of 14 gauge .999, bent into loops. > i use distilled water, no starter salt or anything. > do you all have some wisdom for me? > should i leave my > setup alone,or do some > current limiting,(if so, how?) > i'd be grateful and pleased if you'd take the time to let me share your > knowledge(s), on the list or at my e-mail. > respectfully, Frank Gibson > > http://community.webtv.net/FlyingFawcett/ > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]> >
