Fred wrote: On Bruce Marx's site:
> "There is constant reference to the 'yellow' or 'golden' color. > As mentioned in the description of the DC process, this > color is a result of the silver 'tarnishing'. " (The accepted opinion > is the particle size determines the color - below he oddly says > the tarnishing makes it "heavy" and causes very short life due to > settlement?) > Yes, this is absolutely wrong. Tarnish is caused by reaction with sulfur. There is NO sulfur present in any of the processes. > > "Colloidal silver produced by the HVAC process is pure, clean > and clear...Particle size is between .002 to .007-9 micron, > yielding 100% 'Bio-Availability' "(Most of us are concerned about > what contaminates in HVAC Cs cause the very low pH , so "pure" > or "clean" is still questionable!) > Is his HVAC CS low ph? Mine is essentially the same as the distilled water was that I started with, about 7. > > "The flow of the current from the positive (anode) to the negative > (cathode) causes minute particles of silver to release. Many > particles will immediately oxidize and adhere to the negative > electrode as a black residue (silver oxides)," (The general > opinion is they are atoms (reduced ions) and form weak, > irregular crystal growths and thus the dark color.) > Silver does not easily combine with oxygen, ie. O2. At the cathode O is formed which is very reactive and may to some extent produce silver oxide. I believe it is likely a combination of both silver particles and silver oxide on the cathode. > > "Low voltage DC colloidal silver has a limited 'shelf life'. Due > to the continuing oxidation of the suspended particles, the > solution will turn to a yellow or golden color. That is wrong, silver does not react with O2 under normal conditions, plus silver oxide is not yellow, it is black. Marshall

