No problem Roger, by the way, I was interested to see you are a
metallurgist - where and what did you work on? Do you have any
test equipment to work with?
Unfortunately, when I sold my HV business I gave away every scrap
of paper, design data, schematics, books and every piece of equipment,
right down to hand tools. While a graduate mechanical engineer,
I have 40 years design and production experience in the custom
HV AC and DC area, as sole engineer and thus got involved in every
aspect from designing our own HV transformers (and the winder -
I used a variable speed hydraulic transmission from an Army tank)
for up to 300KV AC (corona free) down to R&D and the application of
electroplating up to 1/8" thick copper on plastic IV bottles to make
patterns for conformal test fixtures for HV fluid leak detection, for
Phizer (sp) Medical. Even designed and built a full Tokamac magnetic
confinement power system for fission research for U of T.
My Cs unit was developed in response to a near fatal hospital stay
(useless employees and equipment) at age 55! Now 65 and not
going back, unless I break a bone!
Jack of all trades and master of a few?
[email protected]
At 02:52 PM 6/19/2000, you wrote:
In a message dated 6/19/00 11:32:47 AM EST, [email protected] writes:
<< Sorry touchy Roger, thought I was being conservative by saying
"my mentions" and "trace amount" - I am not the only one in the
world with unanswered questions about the logical possibility
of nitrogen compounds formed in an air to water HV arc! I even went
to two of Bruce Marx's sites, THE originator of the HVAC process,
(he says so) to check his comments, but alas, he has weirder ideas
then you! Even says LV Cs has a shelf life of only 2 days to 2 weeks -
you might like him!
Oh well, guess I asked for a slap! >>
Fred:
I also want to apologize. I think you caught me at a weak moment. Let's
maintain a truce about nitrogen compounds (that is, neither of us will
mention it again until I get back the nitrite analysis you asked for from my
latest HVAC CS sample. BTW, that sample is from a 6 gallon ~11 PPM CS lot, so
those results should reflect "my HVAC CS" for some time to come since I see
no reason (except special cases like Lyme and similar tough bugs) to consume
anything above 1 PPM of this product.
Roger
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>