I use a Sencore sc-60 oscilloscope blue_eyes wrote:
> Hi Marshall, > > What did you use to measure the current of the 30 khz. signal? > Multimeter? Oscilloscope? > > The manual for my multimeter does not indicate frequency ranges > or limits with regard to AC current readings, so I don't have > a clue if it is as accurate at 30 khz. as it is at 60 hz. > > David > > Marshall Dudley wrote: > > > > Alvin Rose wrote: > > > > > Hi Marshall > > > Take your sisters zapper and put a 0 to 1000 microamp meter in series > > > with one lead...look for 50 to 100 microamp current flow in the circuit.. > > > you won't get any current flow as the voltage is too low to overcome the > > > skin > > > resistence > > > > I checked the current flow. Just under 10 milliamps. > > > > > between the surface and arterys in the attatchment points... as a minimum > > > of 27 > > > volts is > > > required..without a current flow there is no electrification. > > > the zapper's output is a 30 kc low level output signal which uses this > > > frequency > > > to > > > kill parasites...My testing verifys what Bob Beck says. > > > all I look for is a common sense explanation as the concept is quite > > > simple > > > do you have any theorys as to why the zapper worked... > > > perhaps it was parasites? or extra low skin resistance...... > > > Alvin > > > > Wet skin have a very low resistance. > > > > Marshall > > > > -- > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > To join or quit silver-list or silver-digest send an e-mail message to: > > [email protected] -or- [email protected] > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > To post, address your message to: [email protected] > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <[email protected]> > > -- > E-mail: [email protected] > Fax to: 1-253-681-1133 > ICQ#... 44960928 > > _____NetZero Free Internet Access and Email______ > http://www.netzero.net/download/index.html
