Hi Trem: I am not a scientist, I have made CS for many years first with a home made unit then with a Sota unit, I find Sota units are consistent in the PPM it makes. If a person starts with water that registers 0 with a Hanna PWT meter and after 40 minutes it reads 7 PPM this would indicate to me that this is the PPM of Silver the water contains. You asked about the Gold probes if they changed color. They are just like the Silver probes in that I can wipe a black color with a Kleenex off of them. I use 99.9 % pure gold rods, I just exchange these for the Silver rods I use in making CS. The Kinetic Energy Water is at room tempture, not heated. Kinetic Energy Water is made by what some call implosion technology, you may have heard of the Grander Water Unit? Natural Natures Energies are extracted into distilled water, it then takes 40 days of Homeopathic process of dilution to create one gallon of Kinetic Energy Water. Natural antibiotics from Nature are added to this water, making it very effective against many of the virus and bacteria we encounter every day, I know it will get rid of body lice and a rash created by a kittens fecal matter, so far these are a few of the problems I have had presented to me by people I know. Vision ware is a glass pot I use in making these products. I don't have a way of measuring the PH of the Kinetic Energy Water as yet. My friend and I are looking for a way to get one of our Energy units tested, if you know of someone with a darkfield lens microscope with a video camera attachment I would be interested in talking to them. The test I would like done is if this person had access to water that contained various virus and bacteria. Would be to video a drop of this infected water under the microscope for a period of time, save a little of the infected water, put the rest through the Energy unit, wait 5 to 10 minutes and video a drop of this Energized water under the microscope, then mix a drop of infected water with a drop of the Energized water and video the results, this may not be scientific to some but you don't have to be a rocket scientist to see the difference, it's like doing blood analyses. I hope this information is of some help to you. Blessings Rev. Ted
Trem wrote: > Hi Ted, > > This is REALLY bothering me. Do the gold electrodes go through ANY change? > That is, do they lose their smoothness, turn color, look as though they are > loosing any metal, etc. Please tell us your observations. > > This is really a quandary for me because it goes directly against my > experience and knowledge. If what you say is happening, my mind is looking > for another conclusion as to why the Hanna indicates conductivity in the > water. I assume you're using a PWT and not a TDS meter. > > Electrolysis is still electrolysis and gold is not affected by low voltage > electrolysis. There's something in the equation here that isn't clear yet. > What is Kinetic Energy water? What is it's pH? What is a vision ware pot? > What is it made of? > > As far I can tell, you are the only person that can make colloidal gold > without using HVAC to dissociate the atoms and I for one need to know how > you suceeded. > > Thanks for sharing your info. > > Back to you Ted, > > Trem > > ----- Original Message ----- > From: "Ted Windsor" <[email protected]> > To: <[email protected]> > Sent: Saturday, October 28, 2000 10:23 PM > Subject: Re: CS>collodial gold > > > Not true Trem, I use a Hanna unit, it test my initial water at 0, using a > Sota > > unit, after forty minutes it test CS at 7 PPM and Gold at 11 PPM, several > have > > stated that these Hanna units are not accurate but at least I have a > consistence > > figure every time, the water created has gotten rid of body lice and a > rash > > caused by fecal matter from a kitten, as well as many other challenges. > > Blessings > > Rev. Ted > > > > Trem wrote: > > > > > Hi Janine, > > > > > > No matter what anyone says, you cannot make colloidal gold with low > voltage. > > > Observe gold coins that have been in the ocean for hundreds of years. > They > > > come up pristine. Electrolysis does NOT dissociate gold atoms. Gold is > the > > > mother of all metals and cannot be taken apart with any single acid such > as > > > hydrochloric or sulfuric. I'm sure you have seen coins brought up that > look > > > as new as the day they were dropped into the ocean which is a GOOD > > > electrolysis machine. It is only combinations of acids such as aqua > regia > > > and some recently made acids that can do the job. HVAC is the only way > to > > > tear the atoms off gold. You will spend the rest of your life waiting > if > > > you use low voltage. > > > > > > Trem > > > > > > ----- Original Message ----- > > > From: "GaryJanine" <[email protected]> > > > To: <[email protected]> > > > Sent: Friday, October 27, 2000 11:30 AM > > > Subject: CS>collodial gold > > > > > > > I would like to know if anyone knows how to make colloidal gold? I > > > currently > > > > make CS and have been looking into gold and wonder if you need to use > high > > > > voltage or if low voltage will work too? Has anyone made and/or used > CG > > > > successfully? For what purpose? Thanks for any help. > > > > > > > > Janine > > > > [email protected] > > > > > > > > > > > > > > > > -- > > > > The silver-list is a moderated forum for discussion of colloidal > silver. > > > > > > > > To join or quit silver-list or silver-digest send an e-mail message > to: > > > > [email protected] -or- [email protected] > > > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > > > > > To post, address your message to: [email protected] > > > > Silver-list archive: > http://escribe.com/health/thesilverlist/index.html > > > > List maintainer: Mike Devour <[email protected]> > > > > > > > > > > > > > > > > > >
