Thanks Mike, Will give it a shot and see if there are any detectable differences - Later! Robert Bartell ----- Original Message ----- From: Carol & Mike Fuller <[email protected]> To: Silver list <[email protected]> Sent: Saturday, November 04, 2000 11:43 PM Subject: CS>Making your own energised water
> Hi Robert and others also interested in 'energising' water, > > Firstly, I recommend a couple of books that will certainly improve your > understanding of water: > Living Energies by Callum Coats > Sensitive Chaos by Theodore Schwenk > > Second, here is an cheap and easy way of making your own 'energised' water > that you can try at home prior to generating some CS, or even just for > drinking. The principles involved are vortical movement of the water, > magnetism, and entrainment, which all sounds a bit fancy for what is quite > simple in practice. > > Get two drink bottles, 2 litres (1 quart) in size. Use the type that are > round and smooth from the body to the neck, not ribbed or oddly shaped. > You are after ones that will produce a clean vortex of water. The > easiest, and safest, would be plastic ones but the pursts may want to use > glass later on. Clean the bottles thoroughly to remove any traces of > their previous contents. Using unflavoured mineral or soda water bottles > makes this easier. > > Glue the flat tops of their lids together, so that when the bottles are > reattached one will be standing upside down above the other. Drill a 1 cm > (3/8") hole through the centre of the glued lids. This seems a reasonable > size although some may wish to play with different diameters. > > Glue two, or perhaps four, moderately strong bar magnets about 2 cm (3/4") > below the neck of one of the bottles. Position them equidistant from each > other (opposite sides for two, compass points for four) and like poles > facing down (and up) the bottle length. I don't think it matters whether > it is north or south facing down, as long as they are all similar. > > The third part is optional but I consider it important. Obtain some > high-energy water from whatever source you can, which could be from an > alternative energy store or over the internet. An example, and probably > not the best available, would be Grander Blue water. You don't need very > much so just buy a small amount. If you have choices, buy the very best > you can. If it is true high-energy water, it will keep this energy for a > very long time. > > Fill two or more very small glass bottles with the high-energy water. > Make sure the bottles are clean and pure prior to filling. The idea here > is to attach the bottles to the outside of the lids, so judge how many > you will need to fit. They cannot be too big or else they would > interfere with screwing the lids back on the bottles. Tape or glue the > bottles securely. Ideally you would try to surround the lid with water, > so the engineering types may try a donut-type arrangement. You can use > copper for the container but don't use any metal that can be magnetised. > > To actually 'energise' the water, 3/4 fill the non-magnet bottle with > distilled water (if you're using it for CS) or good quality filtered water > (if its for drinking). Screw on the double lid and screw the inverted > magnet bottle into the top. Flip the bottles over and move the base of > the top bottle in a circular motion a few times to initiate a vortex in > the water (a narrow tornado shape). Its worth the effort just to watch > this a few times - I find it fascinating. > > When completely drained, flip the bottles over once more and repeat the > action, this time going from the magnet to the non-magnet bottle. Voila, > your water has been 'energised'. Transfer it to another container or > simply cap with a different lid. > > If anyone tries this, please let the group know any results. > > Namaste > > Mike Fuller > > "/When unseen things become obvious, you can't go backwards into ignorance/" > Kryon > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]> > >
