Wayne;
On this list HVAC generally means using a 12 kv of 15 kv NST.
>From my investigations of HVAC, I have tried the two wet electrodes, the one
wet with the other slightly above the surface of the due so as to form a cone,
an the arc method where the arc electrode is about 0.40" above the DW.
The smallest particle size and most stable is with the arc method. I do not
sell machines. I just investigate and give away CS.
>From the T.E.M. the HVAC ARC method also produces a structure in the water.
To use the arc method there are two ways;
1. The arc electrode is a Bosch platinum spark plug and no cover gas. I
personally have not had much success with that although there is a person that
is selling HVAC gens that use it.
2. The use of dry ice in an enclosed chamber with an opening into the free
board above the DW, and using a silver arc electrode. I f you want instructions
just ask. Without the CO2 one forms whole bunches of NO3, and that is not very
good.
"Ole Bob"
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
