The PPM readings drop over night due to ions agglomerating into particles. Therefore, some of the ionic content converts to colloidal content. Colloidal particles do not conduct electricity. Only ionic content conducts electricity and the meter reads only conductance.
Slight yellow CS is still OK but dropping the current and increasing water motion will help to make the stronger CS with particles small enough for the sol to be colorless. Personally, I'd not exceed 2 ma. It takes more time but the results are better. Ken At 09:23 AM 8/19/01 +0800, you wrote: >HI i am new to this group i am from Singapore, came to knoe of CS just >about two months ago, bought a SOTA instrument Silver maker and have been >experimenting (injesting and external application) with since, just >purchase a ppm meter that measured from 0.0 to 90.00 from a shop here >www.transinstruments.com, most of the batches of CS i made range from 4.5 >to 10 ppm, colour of liquid from clear to slight yellow, taste of yellow a >little bitter, i have the following question which i hope this group could >help:- the solution i made don't seem to be stable as in the ppm reading >drop over the nite and the mA current i measured from beginning to finish >is from 12mA to 35 mA (is the current too large for producing small >particles CS) over 2 hours and the ppm is about 12 ppm . > > >-- >The silver-list is a moderated forum for discussion of colloidal silver. > >To join or quit silver-list or silver-digest send an e-mail message to: >[email protected] -or- [email protected] >with the word subscribe or unsubscribe in the SUBJECT line. > >To post, address your message to: [email protected] >Silver-list archive: http://escribe.com/health/thesilverlist/index.html >List maintainer: Mike Devour <[email protected]> > >
