Hi Bill, Things are as confused as usual. I have had some strange things happening with my HVAC ARC CS.
I store the CS in the DW bottles. The run on 8/5 checked out as Ag = 15.4 PPM ans NO3 = 2.7 When I rechecked the NO3 on 8/25 it was 18 PPM. On 8/16 I made a 2 gal. batch at Ag = 12.8 and NO3 =2.34 PPM I covered the jug with a single layer of paper napkin and left it in the sunlight on my back deck. I can't check the Ag ppm until about Friday as I am out of chiemiclas but the NO3 checked out at 16 PPM So on 8/26 I made another 2 gal. run the NO3 = 3.43. I put into two DW bottles, one capped tight and the other with a single layer of paper napkin covering the opening. 8/27 close bottle NO3 = 1.8; Open bottle NO3 = 8.28 ????? could be my error. 8/28 closed bottle NO3 = 2.16 Open bottle NO3 =2.34 8/29 closed bottle NO3 = 2.16 Open bottles NO3 = 2.7 On 8/28 I made two runs the only difference was that one had a Bosch plug and the other a silver "V" point 0.040 X 1/2" add for these two runs I added Dry Ice to my CO2 generator. Everything else held constant Run #1 The Bosch plug run had 27 ppm of NO3. Run #2 The silver "V" run had 8.1 ppm of NO3. I have never seen such high NO3 measuremnts!!!!! So I made a 3rd. run with the "V"point but replaced the plate electrode (1" x 4" wet) with a 5" #14 wire and the NO3 is 3.78? Confused "Ole Bob" -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
