Thanks Mike, Must have been an interesting night. I wonder how he knows that CS requires extra oxygen to work or that CS pulls oxygen out of the body...has he tested this extensively or just making suppositions do you think?
You might be interested in reading his US patent regarding the ultra secret CS generating method : US patent 6022459 which can be read at http://www.uspto.gov/patft/index.html It is as if he has combined the Clark zapper with the Beck purifier, in that this system uses 10kHz DC offset current which is polarity changed 4 times per second. His theory talks of high voltage vacuum cathodic sputtering shifted to a low voltage liquid environment... in other words, the silver ions from the anode plate out on the cathode and then further silver ions from the anode knock the loosely attached cathodic particles off into the water. Probably all that happens, is that by reversing the polarity of the electrodes, these particles are expelled from the now positive electrode. Sounds like he has updated his frequency into the gigahertz range? Much of the patent is involved in detailing his nifty proximity switch arrangement. Glad to see you get out once in a while :-) Ivan. > -----Original Message----- > From: Mike Fuller [mailto:[email protected]] > Sent: Wednesday, 28 November 2001 10:33 a.m. > To: Silver list > Subject: CS>Bill Briggs talk > > > Hi all, > > I attended a talk by Bill Briggs last night to hear what "Australia's > leading authority on colloidal silver" had to say on why his > product is far > better than anyone else's. The initial impression was that he > is not what > I'd call a good public speaker in that he could not get his > ideas across > very well at a lay level. He also couldn't answer adequately > any of the > questions concerning obvious inaccuracies in his literature and on the > website. > > Concerning his colloidal silver, it was hard getting any real > details about > the process (which is probably fair enough on a commercial > level) but I did > hear that it involves a 50 volt process and the water is deionised and > degassed and its structural matrix is aligned. When asked > about this last > part he said that magnets weren't involved but wouldn't > elaborate further. > He did say that a magnetron, using frequencies higher than > microwaves, was > used in getting the silver off the electrodes. > > The most interesting thing for me was that hydrogen peroxide > was involved in > the generating process and this produced silver (ions/particles?) with > oxygen bonding that became nascent oxygen in vivo. the result > is that when a > white light is shone through the colloidal silver, it has a > blue cast. Has > anyone on the list generated colloidal silver using any > amount of hydrogen > peroxide in the water? I have a vague recollection of someone > saying it > produced large flakes of silver. > > Bill's main thrust was that silver requires oxygen to work in > vivo, and most > commercial and home-grown CS robs the body of oxygen whereas > his has the > oxygen present. Perhaps someone could comment on this? > > We did get his book for free, which I read last night. Again, I was > unimpressed but others may get some value from it. Copies can > be obtained > from: > Silver Colloid Australia Distributors > 9/131 Bulleen Rd > North Balwyn > Victoria > Australia 3104 > > I don't know if they charge for the book, you may be lucky. > > Regards > > Mike Fuller > > > -- > The silver-list is a moderated forum for discussion of > colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail > message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
