So from 3 to 30,000 volts currently under production...that is a huge range. Could be unprecedented as a manufacturing parameter.
Thanks Jim. BTW generating the same 15-20 PPM after 4 days as you get after 2 may be unprecedented also ;-) > -----Original Message----- > From: Jim Meissner [mailto:[email protected]] > Sent: Friday, 30 November 2001 6:05 a.m. > To: *Silver-List* (E-mail) > Subject: Re: CS>newbie question/oldbie question > > > I happen to use 3 volts and a 4.7 Kohm limit resistor with > the generator I > make. > In 1 day you get 5 PPM, in 2 days you get 15-20 PPM, in 3 > days you get 15-20 > PPM, in 4 days you get 15-20 PPM. > I am not in a hurry and with this system the time is not critical. > > Juergen P. (Jim) Meissner > Check out my Website at www.MeissnerResearch.com > Read about the benefits of the Brain State Synchronizer > sounds for improving > your life and health. > ----- Original Message ----- > From: I Anderson <[email protected]> > To: <[email protected]> > Sent: Thursday, November 29, 2001 6:24 AM > Subject: RE: CS>newbie question/oldbie question > > > > Ken, > > > > Theoretically 0.79 V above the 0V set by a standard > hydrogen electrode > > (bubbling hydrogen over a platinum electrode I think). > > > > I should think that a single 1.5V cell would do something over a day > > or so. > > > > Ivan. > > > > > -----Original Message----- > > > From: Ode Coyote [mailto:[email protected]] > > > Sent: Thursday, 29 November 2001 12:43 a.m. > > > To: [email protected] > > > Subject: Re: CS>newbie question/oldbie question > > > > > > > > > A high voltage helps push current through highly resistive > > distilled > > > water but the water becomes less resistive with process > time and the > > > current draw increases. You can start with many nine volt > batteries > > at > > > first but should reduce the voltage as the process goes to > > > keep the current > > > draw down. Ending up with one battery is good. > > > Starting out with one battery is OK but can take a very long > > > time. Any > > > voltage over 3v [I think] will work. Ivan can tell you what > > > the absolute > > > minimum is. > > > ken > > > > > > At 09:08 AM 11/27/01 -0500, you wrote: > > > > > > > >----- Original Message ----- > > > >From: <[email protected]> > > > >To: <[email protected]> > > > >Sent: Tuesday, November 27, 2001 9:00 AM > > > >Subject: CS>newbie question > > > > > > > > > > > >> OK-I got my first set of silver rods, my three 9 volt > > > batteries and my > > > >> alligator clips. I've made umpteen 2 cup batches using 4 > > > different brands > > > >of > > > >> DW,(the first batch was yellow, all others were clear and > > > it all has a > > > >> slightly bitter taste.) Now, I want to know, what do I > > > have to do to > > > >increase > > > >> the amount I make in each batch? I'm brewing it, > according to my > > > >directions, > > > >> for 1 hour,(I wipe off the rods and stir the water after > > > the first 30 > > > >> minutes,)-if I want to make double or quadruple the > > > amount, or even a > > > >gallon, > > > >> do I need more power? How much more? Longer brewing time? > > > I'm thinking of > > > >> getting a small fish tank to make it in-would the bubbles > > > be a good idea? > > > >> (Sort of like stirring. . .) Sorry if these questions > seem SOOOO > > > >elementary > > > >> to some of you, but I've just started :-) > > > > > > > >I don't have any answers for Kathryn, but would like to add > > > more questions > > > >to this. > > > >After many moons of using my trusty CS generators, I am > > > getting ready to do > > > >the homemade alligator clip routine (I bought some lovely > > > silver that I'm > > > >itching to use). > > > > > > > >1) What is the advantage to using many 9 volt batteries in a > > > row, as opposed > > > >to one? > > > > > > > >2) Also, is one 12 volt battery okay to use instead of a 9 volt? > > > > > > > >Thanks. > > > >Colloid > > > > > > > > > > > >-- > > > >The silver-list is a moderated forum for discussion of > > > colloidal silver. > > > > > > > >To join or quit silver-list or silver-digest send an e-mail > > > message to: > > > >[email protected] -or- > > > [email protected] > > > >with the word subscribe or unsubscribe in the SUBJECT line. > > > > > > > >To post, address your message to: [email protected] > > > >Silver-list archive: > > http://escribe.com/health/thesilverlist/index.html > > >List maintainer: Mike Devour <[email protected]> > > > > > > > > > > > >
