Hello list, Wednesday, January 23, 2002, 4:56:14 AM, you wrote:
IA> Russ, IA> In this case it is the ionic form that is toxic. The ionic gold needs IA> to be reduced to metallic gold before ingestion. IA> Has any one thought of LVDC or LVAC arcing under water ...why does it IA> need to be HV? IA> Ivan Ivan: Ole Bob, Chip Hoyle, and myself had an off list, colloidal gold manufacturing discussion for some months. The results of bouncingmany different ideas off of each other, along with trying various setups, yielded the following results. HVAC is the best way to make CG (of the ways we experimented with). My personal setup uses a 15 KV 60 mA NST, a floating electrode setup, and a cooling setup. The cooling setup consists of a 240 gallon water tank, and a 300 GPH water pump. The water is circulated around the glass, 2 gallon "batch tank". As the water is never warmer than 62 degrees F, I never have a problem with heat. Ole Bob is using a cooling technique as well, and, if memory serves me, 2 60 mA transformers in parallel. He also has a setup to adjust the arc gap with the unit running. Because a spark gap blows RF all over the place, we have both used small AM radios to monitor the spark gap, without having to physically be there looking at it. Because my setup is in the basement, there is some natural shielding to the RF, which I initially had great concern over, living in the approach path to 2 different airports. I have found, through actual testing, that the RF noise drops off quickly with distance. And, since no one from the FAA or FCC has ever shown up, I really don't think it is a problem. Since my setup now has a massive cooling system, I can remove the floating electrode setup, as suggested by Ole Bob. I have yet to shield the electrodes with borosilicate glass, as Ole Bob does, but it can only help. -- Best regards, Solar -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>

