Could someone share specific method of making CGold. The following is
all that I have gleaned off this list-serve so far:
"You can tell CG by its color. It starts out a very pale lavender and
increase to red with ppm."
Pale lavendar is how many PPM? Red? Just looking for rough estimates.
I know this is not an exact science when using neon sign transformers.
"HVAC is the best way to make CG (of the ways we experimented with). My
personal setup uses a 15 KV 60 mA NST, a floating electrode setup, and a
cooling setup. The cooling setup consists of a 240 gallon water tank,
and a 300 GPH water pump. The water is circulated around the glass, 2
gallon "batch tank". As the water is never warmer than 62 degrees F, I
never have a problem with heat. Ole Bob is using a cooling technique as
well, and, if memory serves me, 2 60 mA transformers in parallel. He
also has a setup to adjust the arc gap with the unit running. Because a
spark gap blows RF all over the place, we have both used small AM radios
to monitor the spark gap, without having to physically be there looking
at it. Because my setup is in the basement, there is some natural
shielding to the RF"
What is the process time?
How much heat can be generated without cooling? Why keep it cool?
I have heard of floating electrodes and submerged electrodes...
Quoting from the list again:
"Since my setup now has a massive cooling system, I can remove the
floating electrode setup, as suggested by Ole Bob."
What is a good electrode spacing? (arc gap), and are the electrodes
submerged in DW?
Must you use electrode rods with a neon transformer or will gold coins work?
Please enlighten me or direct me to a website.
Richard
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
