Next time you hear "Because we've always done it that way" - 
consider the following. It's no urban legend - this is absolutely true: 
  In the United States the standard railroad gauge (distance between 
  the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number, 
  so why was that gauge used? Because that's the way they built 
  them in England, and 

  English expatriates built the US Railroads. 

  Why did the English build them like that? Because the first rail 
  lines were built by the same people who built the pre-railroad 
  tramways, and that's the gauge they used. Why did "they" use that 
  gauge then? Because the people who built the tramways used the 
  same jigs and tools that they used for building wagons, which used 
  that wheel spacing. 

  Okay! Why did the wagons have that particular odd wheel spacing? 
  Well, if they tried to use any other spacing, the wagon wheels 
  would break on some of the old, long distance roads in England, 
  because that's the spacing of the wheel ruts. 

  So who built those old rutted roads? Imperial Rome built the first 
  long distance roads in Europe (and England) for their legions. The 
  roads have been used ever since. And the ruts in the roads? 
  Roman war chariots formed the initial ruts, which everyone else 
  had to match for fear of destroying their wagon wheels. 

  Since the chariots were made for Imperial Rome, they were all 
  alike in the matter of wheel spacing. 

  So the United States standard railroad gauge of 4 feet, 8.5 inches 
  was derived from the original specifications for an Imperial Roman 
  war chariot. 

  So the next time you are handed a specification and wonder what 
  horse's ass came up with it, you may be exactly right, because the 
  Imperial Roman war chariots were made just wide enough to 
  accommodate the back ends of two war horses 

  Now the ironic twist to the story... When you see a Space Shuttle 
  sitting on its launch pad, there are two big booster rockets 
  attached to the sides of SRBs. The SRBs are made by Thiokol at 
  their factory at Utah. The engineers who designed the SRB would 
  have preferred to make them a bit fatter, but the SRBs had to be 
  shipped by train from the factory to the launch site. The  railroad 
  line from the factory happens to run through a tunnel in the 
  mountains. The SRBs had to fit through that tunnel. The tunnel is 
  slightly wider than the railroad track, and the railroad track, as you 
  now know, is about as wide as two horses' behinds. 

  So, a major Space Shuttle design feature of what is arguably the 
  world's most advanced transportation system was determined over 
  two thousand years ago by the width of a horse's ass!