Hello James, I got the same information from WishGranted.com, divide the reading in half for ppm correlation. I find that to be fairly easy. Interestingly, I notice that my Colloid Master 777 generator has a 0-10 linear potentiometer scale for the ppm setting and the '5' setting is doubled and I have 10 ppm. This may be an anamoly, I don't know at this point, but it is interesting.
John -----Original Message----- From: James Allison [mailto:[email protected]] Sent: Tuesday, May 28, 2002 1:49 PM To: [email protected] Subject: Re: CS>Re: Supercharged CS (Digest #387) Hi Dean, I'm just curious as to what you base your opinion about the meters on? >From what I understand, they both read conductivity, and both do the same job, except that the PWT reads in µS/cm instead of PPMs like the TDS1 does, which actually makes the PWT harder to use, because you need to divide the number from the PWT in half, in order to get an accurate reading. At least that's what all the techs over at Hanna have told me time and time again. If you have info that differs, please let me know. Yours in health, James Allison ----- Original Message ----- From: Dean T. Miller To: [email protected] Sent: Tuesday, May 28, 2002 1:36 PM Subject: Re: CS>Re: Supercharged CS (Digest #387) Hi John, Which Hanna tester? If it's not marked, it's probably the TDS (Total Dissolved Solids) tester, which is almost useless for measuring distilled water and CS. The Hanna PWT (Pure Water Tester) is what's needed. On Tue, 28 May 2002 07:21:46 -0700, "John Reeder" <[email protected]> wrote: >That is the problem, rapid particle production and distilled water >doesn't go together. If there is rapid production, there is generally >some type of particulate contamination in the water. I measure my >distilled water with my Hanna tester (Walmart brand) and it is always >close to zero, as it should be. -- Dean -- from (almost) Des Moines -- KB0ZDF -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
