Greetings Ya'all, Not ALL CS is benign!.
Beware of those who tinker with high voltage AC or DC as they do generate NO3 and NO. The legal limit of NO3 is 10 ppm and on NO is 1 ppm. Let's just place high voltage at over 50 volts. I have measured NO3 at 1 PPM in 37v CS. One can measure NO3 which forms nitric acid in the CS with over the counter chemicals, but NO can only be measured with a spectrophotometer. On experimenter when warned checked the NO3 in his HVAC ARC CS at 100 PPM. That is BAD news, besides being ten times the legal limit. At above 10 ppm it will etch your teeth. Been there done that! As reported earlier 1.2 volts does make good CS. It takes a bit longer, but there is no silver oxide or silver peroxide formed, which translates into the fact that you never have to clean electrodes. "Ole Bob" -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
