The lead content in .999 silver will be so low [if there is any at all in
your particular batch] that you'd get a lot more just by walking along the
road and breathing the air that contains a little dust contaminated by cars
driven in the sixties.
The main contaminants in silver are usually copper and gold. Bismuth and
lead are way down there on the scale if there is any.
.999 is 99.9% pure. At worst, you get one tenth of a percent of ANY
contaminant which, in the amount of water you use to make a batch, can only
be measured in the low parts per billion.
I dare say that your drinking water won't be better.
It's like saying that granite is radioactive [it is] so don't go to city
hall or you'll get cancer.
[Though you sometimes do leave city hall feeling ill...just not from
radiation poisoning.]
Don't go to a granite hospital?
So much for the accurate perspectives of the "professional" [Bet he says
that flouride is harmless]
Hospitals are full of sick people! [huh?]
Ken
At 09:41 PM 3/28/2003 -0800, you wrote:
Hi,
I haven't been here in awhile but still using CS going on 2-3 years. I was
wondering if anyone has ever had their homemade CS tested for lead content?
I make my CS with the 3- 9 volt battery method and 2 .999 silver ingots.
Recently a medical professional said that there is lead in the silver and
that the levels are too high to be safe. What do you guys have to say?
Thanks very much.
Sincerely,
Janine
--
The silver-list is a moderated forum for discussion of colloidal silver.
Instructions for unsubscribing may be found at: http://silverlist.org
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>