The only differece between the two generators is that Utopia addresses
electrode spacing which eliminates one of the major batch to batch
variables. Neither generator controls the output current and it's current
that controls the rate of ion production.
Timing a batch to predict PPM with this type generator is a near
impossibility. Depending on several factors, PPM may vary 90% within the
same time span. For instance, Just a slight difference in intitial
condutivity of the distilled water will result in a major difference in
production rates. Commercial distilled generally ranges from .9 uS to 5 uS
conductivity...sometimes more. That common range can amount to several
hours difference in time to get to the same PPM. Home distilled varies
even more.
It basically amounts to shooting off a rocket without knowing the amount of
or burn rate of the fuel. If you can track the rocket somehow, you can at
least abort the mission before it overshoots the target.
If your electrodes are spaced the same from batch to batch and you hook
up a milliameter, you can get a good basis for repeatability by subtracting
the starting current from the ending current. Calculating PPM from that
info will be somewhat accurate for a given setup but different for each and
every other setup as spacing and whetted electrode area varies.
What the calculation is for your setup, I couldn't even guess.
Bottom line:: If you don't know where you started or how fast you're
going, you can't possibly predict when to stop.
Ken
At 12:34 PM 4/23/2003 -0400, you wrote:
Hi,
My mom purchased a CS Generator through Herbalremedies.Com and we have
been making silver for over a year now. I have recently learned that this
may not be the right way to make it and we may not be getting all the
results we should be (not to mention that we may be adding some wrong
things into our bodies at the same time!). Please help me understand
exactly how CS should be made and how much we should be taking. What we
have made has been very beneficial to this point, but I have been trying
to do more research to make sure we are doing it correctly and am sharing
this information with many others, as well. My concerns developed because
I had looked into the generator sold by UtopiaSilver.com and it was quite
different from the one my mom has. I don't understand all the engineering
and/or chemical details of some of what I have read, but I am VERY
interested in making CS for myself, my family, and several friends that I
have "turned on" to CS. I would really appreciate any help I can get. I
will be out of town for a few days, but will get back with anyone that
responds to my plea ASAP. Thanks for being there!
Patti King
--
The silver-list is a moderated forum for discussion of colloidal silver.
Instructions for unsubscribing may be found at: http://silverlist.org
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
