Hi Reid,

Do you really need mineral free water for your purpose? Does it matter if you 
make particulate silver or ionic silver or a silver compound if you are going 
to be saturating ceramic with it? I would think that you might even consider 
mixing the water with something so you can increase the concentration of 
suspended silver and thus increase the amount of total silver in the ceramic 
water 
purifiers. The idea is that the silver stays in the ceramic and the pathogens 
die as they pass through it right? If you use a good grade of DW and you are 
striving to make ionic silver you will be limited to a very small amount of 
total silver to impregnate the ceramic with. I would think that a high 
concentration of ions, particles and chunks would be best for your purpose.

Best regards,
Andy

From: Reid Harvey 
Silver Friends,
People in a neighboring country, here in South Asia, are making a very
mineral free water, <10TDS, by filtering water through a combination of
glass wool and some sort of resin.  They use about twenty sections of 4
inch pvc pipe, each about 18 inches long, and each stuffed with layers
of the glass wool and resin.  I would like to replicate this process but
first need to find out what resin it is that would be appropriate.  Also
I assume that glass wool is glass wool and is easier to find.

For this process I understand the glass wool can be periodically washed
out and the resin can be processed for re-use.  Is there anyone who can
give me some insight on these materials, how I might use them in this
way and where to find them? We are considering the possibility of making
distilled water in this way so that we can produce concentrated
colloidal silver for use in saturation of ceramic water purifiers.
Thanks,
Reid