Hi Mike
I had a friend with Psoriasis who cured his in about two weeks. He had been
going to the doctors for eight years for this problem. We used a 500 ml of
12% C/S in which was added a tablespoon of MSM then added 10% DMSO
to this mixture..He used applied this mixture to the areas 4 times per day
He also took 4 grams of vitamin C and 1 gram of L-lysine per day..also some
vitamin e and one multi-vitamin..The Psoriasis disappeared without even
a scar
and has not come back.
he continues to take same amount of vitamins to maintain his
health..Naturally
he is elated and says it's hard to believe... Hope this helps.
Alvin
Mike Monett wrote:
url: http://escribe.com/health/thesilverlist/m63059.html
CS> Generator questions...
From: Billy
Date: Sun, 5 Oct 2003 15:16:25
Hi Billy,
> Hello group, thanks for such an informative and helpful list.
> I am currently making a CS generator in the hope that it will
> address problems with Psoriasis, so any help on that subject would
> be appreciated.
I'm not sure if it would do much, but you can search the archives
for more information. Just enter a word of three letters or more in
the search box at
http://escribe.com/health/thesilverlist/index.html
There is a wealth of information avaliable on just about anything
you can imagine.
> I have several questions that the group gurus should be able to
> help me with.
> 1) Reversing the polarity at, say 60 second intervals. Is this an
> advisable thing to do? It is easy enough for me to implement if
> thought to be advantageous.
You sound technically competent - that's good!
Polarity reversal has been studied extensively. The problem is it
increases the chance silver ions, Ag+, will combine with hydroxyl
ions, OH-, that are concentrated near the electrodes. This will
reduce the ionic ppm, which many oldtimers have stated actually does
the work. From my own experience with the Shingles virus, I agree.
Steve Young posted a comparison on June 29, 2000, that showed a 48%
drop using switching periods of 17 seconds and one minute:
http://escribe.com/health/thesilverlist/m23530.html
> 2) I have an output of ~28-30 volts, current limited. What is the
> ideal maximum current to limit the output to?
It depends on the current density. Above 1 mA or so, the
concentration of ions in the Nernst diffusion layer is strong enough
to produce lots of black silver oxide and hydroxide. This coats the
electrodes and the side of the glass, and limits the maximum ionic
ppm to about 10 or so.
Ken's Silverpuppy runs at 615 uA/sq.in and gives good results.
I use 100 uA/sq.in. or less, and sometimes get a trace of oxide on
the electrodes. With good quality dw, I can get above 20 ppm
calculated easily.
Also, you need to minimize any sharp corners, such as at the cut end
of the rod. Ken uses a U-shape that gives two parallel electrodes
connected at the bottom. I took his idea and formed a W-shape to
give more wetted area and reduce the current density.
The current is still concentrated a bit more at the bent ends, which
gives a local hot spot for the formation of oxides. I then went to
spiral electrodes which have gradual bends for the risers.
This improved the performance, so I can get well above 20 ppm
calculated before the cs starts showing a tint. There is a slight
buildup of gray silver on the cathode, but it is minor.
The process is very sensitive to slight changes in ion concentration
at the end. Just one or two ppm difference is all it takes to make
the difference between clear cs and cs that starts showing a slight
yellow tint.
If you run at high current to reduce the brew time, the cell
resistance will produce a voltage that is higher than the 37V limit
of the typical regulators, such as LM117 and LM134.
I posted an ascii design earlier for a current regulator that goes
to 160V, but it's not for people who are not technically skilled and
don't know how to keep from electrocuting themself.
It is very similar to a design Steve Young posted a long time ago
http://escribe.com/health/thesilverlist/m29691.html
But his schematic was lost when the post was archived.
> 3) I have read where replacing one electrode with stainless steel
> rod in place of the silver gives good results. Comments yes/no
> please.
Several people have commented that silver ions have a special
affinity for stainless steel. I use silver for both electrodes so I
can switch them on alternate batches and equalize the wear.
> 4) What is the optimum distance apart for the rods?
Not too critical. Most people run about 1 to 1.5 inches. It helps to
keep the distance constant to minimize hot spots, so you need a
sturdy mounting arrangement. I bolt mine to a plastic lid.
> Hey, this time last week I'd not even heard of CS! So please treat
> me gently )
Welcome to the list - you're going to find a lot of new friends!
> Regards,
> Billy.
Best Regards,
Mike Monett
--
The silver-list is a moderated forum for discussion of colloidal silver.
Instructions for unsubscribing may be found at: http://silverlist.org
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>
