I want to thank everyone that commented on my baking soda question, if I would have been able to get to the archives before I asked, all my questions on that subject were pretty much answered. I am in the process of looking for a high capacity unit( I might go with Terry Chamberlin's system. It sounds perfect) for my hydroponic project I am building in my basement. I going to use CS to control bacteria and fungus on my veggies and plants but I also want CS for myself and my friends and family to take. I do have a question though. I went to radio shack and bought a 110v adapter that puts out 24vac at 1000mA. I put 16oz of DW in a jar with an air stone for aeration and the two electrodes. I also put a couple droppers of some CS that was made with a 9volt unit to help conductivity. I let it sit and work for two hours. What is strange is the electrodes don't look like they need to be cleaned like they do after using the 9volt unit(is that normal with AC?). I have a Hanna TDS meter and I realize you can't check CS ppm this way but I wanted to see how the readings were before and after. the water in the beginning were 000 like I hoped, and when finished it read 005. The end result is very clear and when shining a lazer pen though it, you can barely see a Tyndall effect compared to what I saw with the finished product from the 9 volt unit. Can anyone guesstimate for me what they think the PPM might be for all that I did? thanks in advance.
-- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: [email protected] OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <[email protected]>
