> I have recently built a generator using the guidelines presented on > http://www.stenulson.net/althealth/zapltsk.htm
Welcome, Steve! Bruce is a good fellow. I imagine you're not going to go too far wrong. There are, of course, a hundred ways to make a CS generator, all with different details and some major differences... > The silver electrode remains clean and shiney > The stainless collects some grey deposit which I assume is an indication > that the current is flowing in the right direction, At least my > voltmeter indicates it is so. > > After approximately 3 hours the liquid remains clear. After settling > overnight there is some sediment on the bottom which is very light in > color. Using a laser pen the tyndall effect is quite strong. Sounds good. The "fluff" that you're getting on the stainless electrode should be silver and/or silver oxides, possibly in a matt of small gas bubbles. If you'd like to be absolutely sure, just replace the stainless electrode with a silver one. Then switch 'em every few months to keep the wear even. Silver isn't *that* expensive! Be well, Mike D. [Mike Devour, Citizen, Patriot, Libertarian] [[email protected] ] [Speaking only for myself... ] -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: [email protected] OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <[email protected]>
