Hi Alexandros,
Thanks for your reply. "setting L2:cores equal to 2*<number of cpu
cores>", the error dispear.Best Regards, Wang jintang [Company_logo] Huawei Technologies Co., Ltd. Email: [email protected] No.701, Jianghui RD, Binjiang District,Hangzhou 310000, P.R.China http://www.huawei.com From: Alexandros Daglis [mailto:[email protected]] Sent: Thursday, December 19, 2013 6:12 PM To: Wangjintang Cc: [email protected] Subject: Re: about using UP.OoO with only 1 core Hello, Try setting L2:cores equal to 2*<number of cpu cores> (in your case, set it to 2). It's hard to tell if there is another problem, as you did not share the errors you get. There should be no need to change the simulator's wiring. Cheers, Alexandros On 17 December 2013 10:19, wang jintang <[email protected]<mailto:[email protected]>> wrote: Hi all, I'm using flexus, and want to use UP.OoO model to run the config parameter with 1core. So I config the core number attach L2 is "1", just as below: "flexus.set "-L2:cores" "1" # "Number of cores" (Cores) " But there are more errors about CMPCache when running cloudsuite 1.0 image. I see the the simulator/UP.OoO/wiring.cpp file, the L2 use the CMPCache model. CREATE_CONFIGURATION( Cache, "L1d", theL1dCfg ); CREATE_CONFIGURATION( CMPCache, "L2", theL2Cfg ); Do I need to modify the "CMPCache" using in L2 config to "Cache"? Hope for your reply.
<<inline: image001.jpg>>
