I used,
at lpt t.txt
And all worked fine there. But print file.txt on VMS is not so simple. But
that's another story.
----- Original Message -----
From: Bob Supnik
To: [email protected]
Sent: Friday, March 25, 2016 2:59 PM
Subject: Re: [Simh] text from openvms
1. Attach a (new) host file to the simulated printer on VMS.
2. Print your VMS text file to file to the simulated printer.
3. Let some time elapse, to make sure the print spooler finishes.
4. Detach file from the simulated printer.
5. VMS text file is now on your host in the host file you specified in
step 1.
The LP11 printer is very dumb. It requires carriage returns and
linefeeds for proper sequencing, so you end up with a correctly
formatted Windows text file. Linux should be able to eat that directly;
if it needs the carriage returns removed, there are utilities to do that
(see ASC in the simtools package).
/Bob
On 3/25/2016 2:51 PM, [email protected] wrote:
> Message: 1
> Date: Fri, 25 Mar 2016 14:23:35 -0500
> From: "Bill Cunningham"<[email protected]>
> To:<[email protected]>
> Subject: [Simh] text from openvms
> Message-ID: <2F1F92FAE2FF4B2FB298AD1D3C4C36C3@apxtz6bip7fvgk>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have been studying the best way to copy from a vax simulator with
openvms to a linux host, text files. The Docs look like telnet and kermit are
the way to do it. So is there not a device like ISO that I can copy TOO? I
wouldn't think because cdrom is RO after all. and 'set rq writeenable' isn't
working nor is anything to do with cdrom working.
>
> There may be several ways to do this. I am not concerned so much about
binary files as several .txt files. Am I on the right track with telnet and
kermit from those who have attempted and done this?
>
> Bill
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
