A couple of other things come to mind (naturally, after pushing 'send'):
Initialization will load/verify the microcode. That has to work.After setting RUN and the interrupt enables, expect base-in and control-in command to establish the DUP CSR address, buffers, line mode/enable. These require that the KMC respond to KMCRQI by initiating an A vector interrupt.
Besides RDIO and WRIO, there are bit test (TIOx) , bit set (BSIO) and bit clear (BCIO) instructions that also touch the KMC.
For better directed hints, I'd need more detail on what is and isn't happening.
This communication may not represent my employer's views, if any, on the matters discussed. On 19-May-13 04:53, Robert Jarratt wrote:
-----Original Message----- From: [email protected] [mailto:simh-bounces@trailing- edge.com] On Behalf Of Rich Alderson Sent: 08 May 2013 01:02 To: [email protected]; [email protected] Subject: Re: [Simh] TOPS-20 Source with KMC11 Driver Code?From: "Robert Jarratt" <[email protected]> Date: Tue, 7 May 2013 23:33:36 +0100 Can anyone point me at the right place to look at TOPS-20 driver code for the KMC11? I can see that it is trying to get the Microprocessor to do something and read back some values, but I don't know what values it wants to get and so it reports:Hi, Rob, http://pdp-10.trailing-edge.com/tops20v41_monitor_sources/index.html You want the file KDPSRV.MAC in that directory. Rich _______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simhI am making some progress with getting the KMC/DUP emulation working in SIMH for TOPS-20. At the moment I am stuck on one thing, which is the interrupts to tell the OS that the KMC has processed a buffer. The OS sets the interrupt enable bit and when I have something to report to the OS I set the relevant interrupt bit. However, nothing happens when I do that. I am wondering if I have the right interrupt bit? I am using bits 8 and 9 (decimal). I am not sure how to find out which bit I should be setting. Can anyone help? Regards Rob _______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
