Hello,
Thanks for all the answers.
But it doesn't work. I tried with another pc, and on rj45, and I gave a
specific (dec)Mac address. Same thing.
An idea ?
Gérard Calliet
Le 2013-11-04 08:28, Robert Jarratt a écrit :
Hello Gérard,
If I have understood you correctly you have given the simulated
Ethernet
interface the same MAC address as the physical interface, although if
that
is right there seems to be a typo in your first email. I would
definitely
give SIMH a unique MAC address that is not already on your network.
Additionally, although I suspect it may not make a difference, it
might be
best to use a DEC MAC address in your SIMH config, DEC MACs start
with
08-00-2B.
Regards
Rob
-----Original Message-----
From: [email protected] [mailto:simh-bounces@trailing-
edge.com] On Behalf Of Gérard Calliet
Sent: 04 November 2013 06:50
To: [email protected]
Subject: Re: [Simh] how to get eth connexion
Hi Mark,
Thanks for your answer.
I tried the simh 4.0 beta. It's still not working.
I join show ethernet result, ipconfig/all result, my ucx config, the
init
file.
I choosed the right eth (eth0 is the active wifi interface on
windows).
I gave its mac address as interf mac address in the simh init file.
I don't understand where is the problem. I am just a beginner on
simh, so
I
could have done some error, but I don't see what it is.
Gérard Calliet
pia-sofer
Le 04/11/2013 00:37, Mark Pizzolato - Info Comm a écrit :
> On Sunday, November 03, 2013 at 2:47 PM, Gérard Calliet wrote:
>> Hello,
>>
>> I am a beginer on simh. I have tried a lot of thing to get
connected
>> by ethernet, on simh 3.9 openvms 7.3, openvms 7.0, vms 5.5 ... /
ucx
>> 4.0 I have instaled wincap on a Windows Seven I cannot get any
>> connexion
> Hi Gérard,
>
> Try using the latest simh binaries from
> https://github.com/simh/Win32-Development-Binaries/blob/Win32-
Developm
> ent-Binaries/simh-4.0-Beta--2013-10-02-5feb20d0.zip
>
> Alternatively, if you've got a Visual Studio environment (or
MinGW)
> available, you can build from the latest sources available from:
> https://github.com/simh/simh/archive/master.zip
>
>
> If you are still having problems, provide the output of "SHOW
ETHERNET"
from a "sim>" prompt along with the output of IPCONFIG/ALL from a
Windows command prompt, and explain what makes you think that the
ethernet is not working.
>
> Good Luck.
>
> - Mark
>
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
