Hi Priya, Dave may be right, BUT there still is something strange about your environment.
Dave Johnson had suggested that you need to run as root. I don't think that your problem is due to the running as root issue since if that were the case "SHOW ETHERNET" usually wouldn't have mentioned eth0. The various attempts you made to install a libpcap development environment have left your system in a situation I'm explicitly removing support for going forward. The key information which is most likely the problem is: using libpcap: /usr/local/lib/libpcap.a /usr/local/include/pcap.h *** Warning *** *** Warning *** vax Simulator being built with networking support using *** Warning *** libpcap components from www.tcpdump.org<http://www.tcpdump.org>. *** Warning *** Some users have had problems using the www.tcpdump.org<http://www.tcpdump.org> libpcap *** Warning *** components for simh networking. For best results, with *** Warning *** simh networking, it is recommended that you install the *** Warning *** libpcap-dev package from your Linux distribution *** Warning *** *** Warning *** Building with the components manually installed from www.tcpdump.org<http://www.tcpdump.org> *** Warning *** is officially deprecated. Attempting to do so is unsupported. It seems that the libpcap components you've built with were NOT directly provided by RedHat as part of their Linux distribution or it wouldn't have installed in /usr/local .... Some folks have mangled the working components of libpcap on their Linux systems by attempting to install various versions of non-OS-vendor supplied libpcap components. This mangling is why support for doing this that way has been officially deprecated. Your case has inspired me to take the time to completely remove this support for host platforms which have known good vendor supplied libpcap components (i.e. Linux). You should uninstall the package you found which dropped the libpcap pieces in /usr/local. I'm not a paid RedHat user and therefore don't have access to their customer portal to access their knowledgebase, however since you appear to be, you may want to look at the solution provided by: https://access.redhat.com/site/solutions/57913 Can you explicitly describe EXACTY what version of RedHat Linux you're working with and get back to me directly. I'll dig up libpcap directions for that platform and add it to the simh 0readme-ethernet.txt. Please get back to me. Thanks. - Mark Pizzolato From: [email protected] [mailto:[email protected]] On Behalf Of Hittner, David T (IS) Sent: Tuesday, December 31, 2013 8:11 AM To: Priya Chincholikar; [email protected] Subject: Re: [Simh] EXT : Network Problem Rerun @SYS$MANAGER:TCPIP$CONFIG to fix your TCPIP hardware interface definitions. The error is telling you that it can't find the VAX hardware device (no such device SE0) to attach (on the 4th line). The MicroVAX 3900 in the SIMH VAX does not have an SE0 interface, it has a QNA interface. I think SE0 was the built-in MicroVAX/VAXstation 3100 interface. Was this system disk originally used by a different VAX emulator (like Charon/SRI) or a different model of real VAX? Dave From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Priya Chincholikar Sent: Tuesday, December 31, 2013 7:53 AM To: [email protected]<mailto:[email protected]> Subject: EXT :[Simh] Network Problem Hi, I am trying boot a vax disk on SIMH and it keeps getting hung while starting network like TCP/IP. I have the required lipcap packages. My host is RedHat VM. The simulator was built with network support. *******INTERnet Started************** %UCX-I-DEFINTE, Defining interfaces %UCX-E-INVINTER, Error defining interface: SE0 -UCX-I-ACPQIO, Failure on Internet ACP QIO -SYSTEM-W-NOSUCHDEV, no such device available -SYSTEM-W-NOSUCHDEV, no such device available %UCX-E-INVINTERNAM, Invalid interface name -UCX-I-DRIVERQIO, Failure on Internet driver QIO -UCX-E-INVNETMASK, Invalid network mask %UCX-E-DELINTER, Error deleting interface: SE0 -UCX-I-ACPQIO, Failure on Internet ACP QIO ----> gets hung here usr/local/vax/bin/vax.ini-47> boot cpuname Simulation stopped, PC: 8358DF47 (BBC #3,26C(R3),8358DF9B) sim> This is the build: root@dt558 simh-master]# make vax lib paths are: /lib/ /usr/lib/ /usr/lib/qt-3.3/lib/ /usr/lib/sse2/ using libm: /usr/lib//libm.so using librt: /usr/lib//librt.so using libpthread: /usr/lib//libpthread.so /usr/include/pthread.h using libdl: /usr/lib//libdl.so /usr/include/dlfcn.h using libpcap: /usr/local/lib/libpcap.a /usr/local/include/pcap.h *** Warning *** *** Warning *** vax Simulator being built with networking support using *** Warning *** libpcap components from www.tcpdump.org<http://www.tcpdump.org>. *** Warning *** Some users have had problems using the www.tcpdump.org<http://www.tcpdump.org> libpcap *** Warning *** components for simh networking. For best results, with *** Warning *** simh networking, it is recommended that you install the *** Warning *** libpcap-dev package from your Linux distribution *** Warning *** *** Warning *** Building with the components manually installed from www.tcpdump.org<http://www.tcpdump.org> *** Warning *** is officially deprecated. Attempting to do so is unsupported. *** Warning *** *** Warning *** *** Warning *** vax Simulator are being built with *** Warning *** minimal libpcap networking support *** Warning *** *** Warning *** Simulators on your Linux platform can also be built with *** Warning *** extended Ethernet networking support by using VDE Ethernet. *** Warning *** *** Warning *** To build simulator(s) with extended networking support you *** Warning *** should read 0readme_ethernet.txt and follow the instructions *** Warning *** regarding the needed libvdeplug components for your Linux *** Warning *** platform *** Warning *** *** *** vax Simulator being built with: *** - compiler optimizations and no debugging support. GCC Version: 4.1.2. *** - networking support using libpcap components from www.tcpdump.org<http://www.tcpdump.org>. *** - Local LAN packet transports: PCAP TAP *** *** git commit id is 86e342501deaec3df79b31c13dd6d622938176e2. *** mkdir -p BIN gcc -std=c99 -U__STRICT_ANSI__ -O2 -finline-functions -fgcse-after-reload -fno-unsafe-loop-optimizations -DSIM_GIT_COMMIT_ID=86e342501deaec3df79b31c13dd6d622938176e2 -DSIM_COMPILER="GCC Version: 4.1.2" -I . -D_GNU_SOURCE -DUSE_READER_THREAD -DSIM_ASYNCH_IO -DHAVE_DLOPEN=so -DHAVE_GLOB sim_BuildROMs.c -o BIN/BuildROMs BIN/BuildROMs rm -f BIN/BuildROMs mkdir -p BIN gcc -std=c99 -U__STRICT_ANSI__ -O2 -finline-functions -fgcse-after-reload -fno-unsafe-loop-optimizations -DSIM_GIT_COMMIT_ID=86e342501deaec3df79b31c13dd6d622938176e2 -DSIM_COMPILER="GCC Version: 4.1.2" -I . -D_GNU_SOURCE -DUSE_READER_THREAD -DSIM_ASYNCH_IO -DHAVE_DLOPEN=so -DHAVE_GLOB VAX/vax_cpu.c VAX/vax_cpu1.c VAX/vax_fpa.c VAX/vax_io.c VAX/vax_cis.c VAX/vax_octa.c VAX/vax_cmode.c VAX/vax_mmu.c VAX/vax_stddev.c VAX/vax_sysdev.c VAX/vax_sys.c VAX/vax_syscm.c VAX/vax_syslist.c PDP11/pdp11_rl.c PDP11/pdp11_rq.c PDP11/pdp11_ts.c PDP11/pdp11_dz.c PDP11/pdp11_lp.c PDP11/pdp11_tq.c PDP11/pdp11_xq.c PDP11/pdp11_vh.c PDP11/pdp11_cr.c PDP11/pdp11_io_lib.c scp.c sim_console.c sim_fio.c sim_timer.c sim_sock.c sim_tmxr.c sim_ether.c sim_tape.c sim_disk.c sim_serial.c sim_video.c -DVM_VAX -DUSE_INT64 -DUSE_ADDR64 -I VAX -I PDP11 -DUSE_NETWORK -DHAVE_PCAP_NETWORK -isystem -I/usr/local/include/ /usr/local/lib/libpcap.a -DHAVE_TAP_NETWORK -o BIN/microvax3900 -lm -lrt -lpthread -ldl cp BIN/microvax3900 BIN/vax Show version and show ethernet : KA655-B V5.3, VMB 2.7 Performing normal system tests. 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25.. 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09.. 08..07..06..05..04..03.. Tests completed. >>>usr/local/vax/bin/vax.ini-47> boot cpu Simulation stopped, PC: 20043601 (BSBW 2004367B) sim> sh ver MicroVAX 3900 simulator V4.0-0 Beta Simulator Framework Capabilities: 64b data 64b addresses Ethernet Packet transport:PCAP:TAP:UDP Idle/Throttling support is available Virtual Hard Disk (VHD) support RAW disk and CD/DVD ROM support Asynchronous I/O support Host Platform: Compiler: GCC 4.1.2 20080704 (Red Hat 4.1.2-46) Simulator Compiled: Dec 30 2013 at 17:52:32 Memory Access: Little Endian Memory Pointer Size: 32 bits Large File (>2GB) support OS clock tick size: 3ms OS: Linux dt558.***.com 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:54 EDT 2009 i686 i686 i386 GNU/Linux git commit id: 86e34250 sim> sh eth ETH devices: eth0 eth0 (No description available) eth1 tap:tapN (Integrated Tun/Tap support) eth2 udp:sourceport:remotehost:remoteport (Integrated UDP bridge support) Open ETH Devices: XQ eth0 (No description available) Ethernet Device: Name: eth0 Reflections: 0 Self Loopbacks Sent: 2 Self Loopbacks Rcvd: 0 Host NIC Address: 00:0C:29:59:50:83 Packets Sent: 4 Asynch Interrupts: Disabled Read Queue: Count: 0 Read Queue: High: 0 Read Queue: Loss: 0 Peak Write Queue Size: 1 sim> quit Goodbye NVR: writing buffer to file Eth: closed eth0 [root@dt558 /]# cat proc/version Linux version 2.6.18-164.el5 ([email protected]<mailto:[email protected]>) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:51:54 EDT 2009 Vax.ini : ; ;load CPU microcode load -r /usr/local/vax/data/ka655x.bin ; ; Attach non-volatile RAM to a file attach nvr /usr/local/vax/data/nvram.bin ; ; This virtual machine has 64M memory set cpu 64m ; ; Define disk drive types. RA92 is largest-supported VAX drive. set rq0 ra92 set rq1 rauser=10240 set rq2 rauser=10240 set rq3 cdrom ; ; Attach defined drives to local files attach rq0 /usr/local/vax/data/d0.dsk ;attach rq1 /usr/local/vax/data/d1.dsk attach rq2 /usr/local/vax/data/d2.dsk ; ; Attach the CD-ROM to its file (read-only) ;attach -r rq3 /usr/local/vax/data/cd.iso ; ; Disable unused devices. It's also possible to disable individual devices, ; using a construction like "set rq2 disable" if desired. ; set rl disable set ts disable ; ; Attach Ethernet to a network interface set XQ mac=00:1D:D8:B7:1C:00 set XQ type=DELQA attach XQ eth0 ; ;Uncomment the line below to enable auto-boot ;dep bdr 0 ; ; Choose one of the following lines. SET CPU CONHALT returns control to the ; VAX console monitor on a halt event (where behavior will be further ; determined by whether auto-boot is set--see above. SET CPU SIMHALT will ; cause the simulator to get control instead. set cpu conhalt ;set cpu simhalt ; ; Now start the emulator boot cpu ; ;Exit the simulator ;exit -Priya
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
