Here you go: http://occs.cs.oberlin.edu/~hbent/vaxultrix/boot.gz
-Henry On 12 July 2014 22:57, Johnny Billquist <b...@softjar.se> wrote: > On 2014-07-13 04:52, Henry Bent wrote: > >> Sure, I'll work on getting an Ultrix image in a usable state so that I >> can upload it. >> > > Actually, thinking about it, it should be enough with just the boot file > that you are using. > > Johnny > > >> -Henry >> >> >> On 12 July 2014 22:50, Johnny Billquist <b...@softjar.se >> <mailto:b...@softjar.se>> wrote: >> >> On 2014-07-13 04:19, Henry Bent wrote: >> >> Cool, thanks. >> >> I figured out what's going on. The standalone programs are >> running, >> they just aren't displaying any input or output after the first >> character is printed. So if I do this: >> >> -- >> sim> load -o boot 0 >> sim> run 2 >> >> -- >> and then blindly type "ra(0,0)vmunix", it boots! >> >> >> [...] >> >> Hmm hmm. I suspect I might know what is going on there. I'd have to >> test and play around some to verify, though. The console I/O on the >> 86x0 machines are a bit special, and I wouldn't be surprised if >> there were some issues in simh related to that. >> >> Mark, can we get some trace of all reads and writes to the registers >> related to the console? (There are four logical devices addressed on >> the 86x0 machines through the same CSRs.) >> >> Henry, if you could get such information logged, we could probably >> fix this pretty fast. Or else if you could just provide me with the >> files, I could test this myself as well. I don't have an old Ultrix >> image around, though. >> >> Johnny >> >> >> -- >> Ultrix V2.2 System #2: Wed Nov 18 01:14:13 EST 1987 >> real mem = 8388608 >> avail mem = 6888448 >> using 34 buffers containing 278528 bytes of memory >> VAX 8600, serial no. 1234, hardware level = 7 >> IO adapter 0 at address 0x20080000 is an SBI adapter >> uba0 at address 0x20006000 >> uda0 at uba0 >> uq0 at uda0 csr 172150 vec 774, ipl 15 >> ra0 at uq0 slave 0 >> de0 at uba0 csr 174510 vec 120, ipl 15 >> mba0 at address 0x20012000 >> ht0 at mba0 drive 0 >> tu0 at ht0 slave 0 >> boot device not found >> root device? >> -- >> >> And I can then interact with the console, characters are displayed >> normally, etc. >> >> -Henry >> >> >> On 12 July 2014 19:33, Mark Pizzolato - Info Comm >> <m...@infocomm.com <mailto:m...@infocomm.com> >> <mailto:m...@infocomm.com <mailto:m...@infocomm.com>>> wrote: >> >> On Thursday, July 10, 2014 at 5:23 PM, Mark Pizzolato wrote: >> > On Jul 10, 2014 2:02 PM, Johnny Billquist >> <b...@softjar.se <mailto:b...@softjar.se> >> <mailto:b...@softjar.se <mailto:b...@softjar.se>>> wrote: >> > > >> > > On 2014-07-11 01:08, Mark Pizzolato - Info Comm wrote: >> > > > On Thursday, July 10, 2014 at 3:13 PM, Cory Smelosky >> wrote: >> > > >> On Thu, 10 Jul 2014, Henry Bent wrote: >> > > >> >> > > >>> Well, that at least did something different. >> > >>> >> > >>> sim> boot rq0 /r5:8 >> > >>> Loading boot code from vmb.exe >> > >>> %BOOT-F-Unexpected Exceptio >> > >>> >> > >>> The 8600 simulator always seems to cut off the last >> character >> of its >> > >>> messages, I wonder if that's in any way related to >> the other >> console >> > >>> problems. >> > >>> >> > >> >> > >> 780, 750, and 730 have the same issue...along with not >> actually booting from >> > >> the console RL, floppy, et al. >> > > >> > > The last character output in a message just prior to >> executing >> a HALT >> > > instruction is not surprising since the simulator >> implements a >> delay >> > > (as a number of instructions executed) from when the >> data is put in >> > > the output register prior to generating the completion >> interrupt/status. >> > > The halt instruction gets executed before the delay >> number of >> > > instructions have completed. Even if that was >> 'fixed', nothing >> > > operational would change. The reason the message has >> been >> > > generated will still exist. >> >> The latest github code will no longer drop the last >> character output >> just prior to executing a HALT instruction which returns to >> the >> "sim> " prompt. >> >> Like I said above, nothing else changes though. >> >> - Mark >> _________________________________________________ >> >> Simh mailing list >> Simh@trailing-edge.com <mailto:Simh@trailing-edge.com> >> <mailto:Simh@trailing-edge.com <mailto:Simh@trailing-edge.com>__> >> http://mailman.trailing-edge.__com/mailman/listinfo/simh >> >> <http://mailman.trailing-edge.com/mailman/listinfo/simh> >> >> >> >> >> -- >> Johnny Billquist || "I'm on a bus >> || on a psychedelic trip >> email: b...@softjar.se <mailto:b...@softjar.se> || >> >> Reading murder books >> pdp is alive! || tryin' to stay hip" - B. Idol >> >> >> > > -- > Johnny Billquist || "I'm on a bus > || on a psychedelic trip > email: b...@softjar.se || Reading murder books > pdp is alive! || tryin' to stay hip" - B. Idol >
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh