On Saturday, March 07, 2015 at 4:29 PM, Bill Cunningham wrote:
> I used the rsx files from this site.
>
> http://home.earthlink.net/~n1be/pdp11/PDP11.html
>
> And compiled a pdp11 simh binary. I ran in linux...
>
> ./pdp11 sim.ini
>
> Which as a copy of the file on that page. I didn't copy run.sh the shell
> script.
> When I tried to boot either of the tapes the system told me it was searching
> for a telnet connection and always times out. IS there something wrong
> here?
There are lines in the sim.ini file which say:
; Separate the simulated PDP11 Console from the Simh command window
SET CONSOLE TELNET=10000
;
; Open a separate terminal window for the system console.
; This will simulates a 132-column hardcopy terminal like the LA36.
ECHO
*********************************************************************
ECHO * Opening a new terminal window for the PDP-11 System Console ...
*
;! xterm -sl 10000 -sb -aw -j -T 'PDP-11 Console' -e 'telnet localhost
10000' &
! gnome-terminal -t 'PDP-11 Console' --geometry=132x36 -e 'telnet
localhost 10000' &
The last two lines attempt to start a new terminal window with a telnet session
to the console port of the simulator (the first being commented out). These
are somewhat system specific commands. You can create a separate window and in
that window execute: "telnet localhost 10000". The reset of the commands will
probably work.
If it doesn't work, It will help if you actually provided ALL of the output
produced.
Good Luck.
- Mark
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
