Hello Malcolm,
I wrote the ADC Super Six simulation for SIMH a while ago (maybe 2007 or 2008.) I found some of my original files today that I used to create a boot disk for a Digitex computer that I have with a Super-Six in it. I built the CBIOS in SIMH, tested it on SIMH, and then wrote it to a real floppy disk using ImageDisk. The real computer actually booted! Today I uploaded this stuff to GitHub: https://github.com/hharte/digitex It has been a long time since I worked on this, and I forgot nearly everything about it by now; however, there are some notes and a SIMH config file in the GitHub repository. Take care, Howard From: [email protected] [mailto:[email protected]] On Behalf Of Malcolm Macleod Sent: Thursday, March 27, 2014 4:58 PM To: [email protected] Subject: [Simh] ADC Super Six simulation question I'm trying to get ADC S6 simulation running in the altairz80.exe simulator - so far without success. Here are the SIMH commands I've been trying: SET ADCS6 ENABLED SET CPU Z80 ATTACH ADCS60 AD-MS-P1.IMD [this is the name of a known good IMD image copied from real 8" floppy] BOOT ADCS60 The BOOT command returns the following message, but then hangs indefinitely: Booting ADCS6 Controller My questions are: 1. Any suggestions as to why this is hanging indefinitely - am I missing some critical steps? 2. Do I need to load an image of the S6's on-board EPROM somewhere? 3. Can other floppy image formats (such as DMK) be used with the simulator? If anyone has a working SIMH script and IMD boot disk for the S6, I'd appreciate a copy. Thanks in advance, Malcolm.
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
