I've been playing with the altairz80 emulation to see how close I could get to a Kaypto2 emulation. Attached is my config file so far, and it's about as fat as I can go without changing any code.
A couple of issues came up about the emulated hardware, and I thought I'd ask preferences before modifying anything. 1. What are some of the source file (.c, .h) marked executable> 2. The flexwriter is similiar to yj kp2 display, except that the fw has a 80x24 mapped into memory as a 80x24 array. The kp2 has an 80x25 display mapped into a 128x25 array (memory between 81 and 128 is unused). Should I make a new kp2 display device, or add parameters to the fw code? 2. the wd179x device is the right chip for the kp2, but it is single sided and different tracks/sectors. The side is controlled by an external ioreg. Modify the driver, or seperate it out? ... Probably more if I get more time to play.
kp2
Description: Binary data
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
