NETWORK CONFIG:
===============
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
auto vmstap0
iface vmstap0 inet manual
vde2-switch -t vmstap0 -s /tmp/vde.ctl \
-M /tmp/vde.mgmt -m 666 --mgmtmode 666
auto br0
iface br0 inet static
address 192.168.1.20
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254
bridge_ports eth0 vmstap0
dns-search home
dns-nameservers 192.168.1.254 8.8.8.8
#auto wlan0
#iface wlan0 inet static
#auto wlan1
#iface wlan1 inet static
SIMH CONFIG:
============
#STAR69 DECnet Area Router OpenVMS 7.3
#Configuration File
#Mark Benson 2015/08/30
#Attach NVRAM storage
ATTACH NVR 3900.nvram
#Disable Unused Hardware
#SET TR DISABLED
SET LPT DISABLED
SET RL DISABLED
SET TS DISABLED
SET TQ DISABLED
#Attach Ethernet to VDE Switch
#ATTACH XQ vde:/tmp/vde.ctl
#Attach Ethernet to eth0 (libpcap)
ATTACH XQ eth0
#Set & Attach Storage Devices
SET RQ0 RA92
ATTACH RQ0 STAR69SYS.dsk
SET RQ1 RA92
ATTACH RQ1 STAR69DATA.dsk
#Disable other disks on RQ
SET RQ2 DISABLED
SET RQ3 DISABLED
#Enable and Set CD-ROM (RQB0)
SET RQB KRQ50
SET RQB ENABLED
SET RQB0 RRD40
#Attach OpenVMS 7.3 Install Media
ATTACH RQB0 OpenVMS7.3VAX.iso
#Disable other disks on RQB
SET RQB1 DISABLED
SET RQB2 DISABLED
SET RQB3 DISABLED
#Setup DZV11 Terminal Multiplexer
SET DZ LINES=4
#Attach on Telnet Port 3901
ATTACH DZ 3901
#Setup Console Telnet Port & Buffering
SET CONSOLE TELNET=3900
SET CONSOLE TELNET=BUFFERED
SET CONSOLE LOG=STAR69_CONSOLE.log
#ISSUE BOOT COMMAND!!
#BOOT
#
VDE Management Ouput:
=====================
mark@atomica:~/simh$ unixterm /tmp/vde.mgmt
VDE switch V.2.3.2
(C) Virtual Square Team (coord. R. Davoli) 2005,2006,2007 - GPLv2
vde$ port/allprint
0000 DATA END WITH '.'
Port 0001 untagged_vlan=0000 ACTIVE - Unnamed Allocatable
Current User: NONE Access Control: (User: NONE - Group: NONE)
IN: pkts 9659 bytes 1044095
OUT: pkts 106 bytes 13212
-- endpoint ID 0007 module tuntap : vmstap0
Port 0002 untagged_vlan=0000 ACTIVE - Unnamed Allocatable
Current User: mark Access Control: (User: NONE - Group: NONE)
IN: pkts 112 bytes 13572
OUT: pkts 639 bytes 52448
-- endpoint ID 0003 module unix prog : simh user=mark PID=7973
SSH=192.168.1.101
.
1000 Success
--
Mark @ DECtec.info
twitter.com/DECtecInfo
_______________________________________________
Simh mailing list
[email protected]
http://mailman.trailing-edge.com/mailman/listinfo/simh
