http://ancientbits.blogspot.com/2012/07/installing-rsx-11m-46-from-scratch-part.html
I used those links and that blog. ----- Original Message ----- From: Mark Pizzolato To: Bill Cunningham ; [email protected] Sent: Saturday, October 24, 2015 4:35 PM Subject: RE: [Simh] rsx11m46.tpc and simh Hi Bill, Please provide: 1) The exact place where you picked up the tape image you are trying to boot from 2) The exact output produced when you run the simulator with the provided configuration Thanks - Mark From: Simh [mailto:[email protected]] On Behalf Of Bill Cunningham Sent: Saturday, October 24, 2015 11:37 AM To: [email protected] Subject: [Simh] rsx11m46.tpc and simh I have some instructions on how to use the pdp11 simulator for the mentioned in the subject line. set cpu 11/45 set cpu 256k set cpu idle SET RL enable set RL0 RL02 set RL1 RL02 SET RP ENABLE SET RP0 RP06 ATTACH RP0 RP06.000 SET RP1 RP06 ;ATTACH RP1 RP06.001 SET TS ENABLE SET TS0 FORMAT=TPC SET TS0 LOCKED SET DZ ENABLE SET DZ LINES=8 ATTACH -am DZ 11023 I am not sure the enableds are needed here. And a part additional is, at ts0 rsx11m46.tpc boot ts0 I am getting error codes. Does anyone happen to know simh well enough to get simh pdp11 to boot this file? Bill
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
