Back in about 84. We were users of bridge cs200 serial boxes. Communicating to a unibus board in a borrowed 780. From memory the network communication was a xerox protocol. A while later we were given a 750 to which we moved the unibus adaptor. And subsequently upgraded to tcp/ip which required a sco device to act as a bind server.
The cs200 was a good device. It enabled us to bind serial ports across the network. Allowing me to connect process control kit to expensive laser printer s. And also provided network service connection enabling me to create virtual port connectivity to sun workstation. Etc. Lots of reading Stevens networking books back then. Eventually with the rise of Dec terminal servers and lat. Lantronix produced a good cheap multi protocol devicr On 12 Nov 2015 21:27, "Johnny Billquist" <[email protected]> wrote: > On 2015-11-12 22:19, Alan Frisbie wrote: > >> On 11/12/2015 01:15 PM, Johnny Billquist wrote: >> >> The DECservers 200s were rock solid performers in our engineering >>>> offices and on the factory floor. >>>> >>> >>> Agreed. 200 and 300 were/are great. >>> >> >> How did the Decserver 700 compare against the others? Did it do telnet >> also? >> > > Hi, Alan. > Good question. I've never seen one, so I can't say. > > Johnny > > -- > Johnny Billquist || "I'm on a bus > || on a psychedelic trip > email: [email protected] || Reading murder books > pdp is alive! || tryin' to stay hip" - B. Idol > _______________________________________________ > Simh mailing list > [email protected] > http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
