----- Original Message ----- From: Wilm Boerhout To: simh@trailing-edge.com Sent: Monday, February 15, 2016 3:42 AM Subject: Re: [Simh] vax simh and loading file
Exactly. The only thing that simh adds to this process is the "set cr reset" command to prompt the card reader (driver?). So on simh, the flow control would be: 1. get your "card deck" in a file on the host 2. boot simh with the cr device attached to said file 3. boot your VAX 4. log in, then CTRL/E out to the simh prompt, and issue "set cr reset" 5. issue "continue" to the simh prompt to resume the VAX 6. observe that your job has run, and the file (if not deleted, which is the default) is now a DCL file in your default login directory, default name is "INPBATCH.COM". Name may be overridden by the /NAME qualifier on the job card. /Wilm OK here's what I tried. Issuing "continue" in simg doesn't work. simh> "continue" just gives an error. ./vax lo -r ka655x.bin set cpu 64m set cpu idle=vms set rq0 ra92 at rq0 vms at nvr r set cr autoeof at -a cr list "name of licnese PAKs set cr translation=029 b cpu Then I use "b dua0" no problems login as system and enter password. No problems ^E simh> here I enter "set cr reset" and at simh> I enter "continue" and get an error. <shrug> Bill
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh