I have just been looking at the problem again and realised the remote port was still connected to something else, so simh couldn't connect to it. Sorry about that.
Regards Rob From: Mark Pizzolato [mailto:[email protected]] Sent: 05 November 2016 18:20 To: [email protected]; [email protected] Subject: RE: [Simh] PDP8 TTIX Outbound Telnet Connection Hi Rob, This is one of those 'it works for me' cases, and you haven't provided any details about exactly what you're doing, so I can't suggest what might be happening. Please provide: 1) SHOW VERSION output and the full configuration file for the case which works. 2) SHOW VERSION output and the full configuration file for the case which fails along with any failure messages you might be seeing. Thanks. - Mark From: Rob Jarratt Sent: Saturday, November 5, 2016 11:03 AM To: [email protected] <mailto:[email protected]> Subject: [Simh] PDP8 TTIX Outbound Telnet Connection In the PDP10 emulation I use a command like this following to connect the DZ to a DECserver which I then have connected to a Teletype, and it works great: att dz line=1,connect=192.168.0.231:2006;telnet This allows me to connect the Teletype as if it was another terminal. I am trying to do the same thing now in the PDP8 emulation with TTIX, but it does not seem to work when I try this: att ttix line=1,connect=192.168.0.231:2006;telnet Am I doing something wrong? Regards Rob
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
