On Friday, March 30, 2018 at 11:55 AM, Phil Fisher wrote: > It seems it is Centos6 (specifically Centos 6.9, kernel 2.6.32-696) since I > also > tried on my Centos 7 -- not as recent as yours Mark (I don't like > RHEL7/Centos7 so tend not to use it unless I need something specific). > > Just like you I re-used my simh-master.zip (recent), built SimH > (4.0.0-current) > and ran pdp11 (no DEBUG). > > I copied the RL01 image I had already that I knew worked from my Win 10 > storage onto Centos7 "local storage". I then did a cmp on the two for > confirmation they were identical. Then created 11/70, 1MB RAM, IDLE > enabled. Attached the new disk from local Centos7 storage and noted it was > immediately correctly recognised (thanks for the tip Mark), booted and et > voila! > > So there is something screwy with my Centos6 or the kernel. I will re-update > Centos6 later and re-try, just in case.
Before involving simh, please compare the md5sum of the disk image file that works vs the one that doesn't. - Mark _______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh
