My problem is probably more related to my test setup of the ECM2
package than it is SIMS but I figured someone on this list might give
me a hint of where to look
I am currently testing an ECM2 package on Tiger Server to eventually
replace my SIMS box. For the most part, its working beautifully. I
have a total of three mail servers behind my firewall on local
addresses. A local DNS provides proper forward/reverse lookups and
MX records. One server is the ECM2 system. One a SIMS box that's
been running smoothly for years. And one is simply Postfilx running
on a Panther server that is primarily a web server. It is used for
sending only by some web scripts. And it is available on a non
standard port for users to send through when they hit a blocked port
25 issue. It receives no mail. All three mail servers are on the
same local subnet and have various accurateimage.org host names.
I setup one of my lesser used domains on the ECM2 server to test. I
changed all of the DNS servers to correctly point MX records for this
domain to this server. Its all working fine except for when the SIMS
server tries to send messages to the ECM2 server. The ECM2 server
seems to receive mail just fine from most any server on the planet
except the SIMS box that's sitting right next to it. It responds
with a 550 error when any mail is sent from SIMS where the from
address is any account on my my domain accurateimage.org. If I send
through the SIMS box where the from address is some other domain
(which also uses the same SIMS box as its MX server) the ECM2 box
accepts it just fine. The ECM2 box accepts mail from the Postfix
(also behind the same firewall on the same local subnet) server where
the sender is from accurateimage.org just fine.
What exactly causes a 550 error? Is it something specific or is this
one of those errors that might mean any of a number things? I'll
post the complete text from one below.
This glitch aside, I think I'm really going to enjoy using ECM2.
Very easy to configure once its all installed. It adds IMAP and
Webmail service with little effort. I'm a complete SpamAssassin
novice but it's inclusion looks like a major plus.
Thanks
Bob Smith
Accurate Image • Bob Smith Photographer • Waco Texas USA
http://www.accurateimage.org
*****************************************
Failed to deliver your message to [EMAIL PROTECTED]:
SMTP: Address rejected by host
Host 'sam.accurateimage.org' says:
550 Sender verify failed
Reporting-MTA: dns; accurateimage.org
Final-Recipient: rfc822; [EMAIL PROTECTED]
Action: failed
Status: 5.0.0
Received: from [192.168.0.10] (HELO localhost.localdomain) by
accurateimage.org (Stalker SMTP Server 1.8b8) with ESMTP id S.
0000530368 for <[EMAIL PROTECTED]>; Tue, 12 Sep 2006 05:31:09 -0500
Date: Tue, 12 Sep 2006 05:30:39 -0500
Subject: ChronoSync Notification
Message-ID: <[EMAIL PROTECTED]>
MIME-Version: 1.0 (Generated by Pantomime 1.1.2)
From: Bob Smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="MACINTOSH"; format="flowed"
#############################################################
This message is sent to you because you are subscribed to
the mailing list <[email protected]>.
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]>
Send administrative queries to <[EMAIL PROTECTED]>
