On Tue Apr 7 16:23 , Joel Sherrill sent: >By inserting debug prints, I have confirmed that >the hwuart is shifting the correct data out the >TXD pin. The TXD pin is connected to the RX pin >of a SerialRX instance. All data sampled at the >RX pin is 0 (BAD). Thus all data in the feedback.tcl >display is 0.
>From the description, the pins are not connected. Is the connection done with a Netlist? If so, perhaps its methods deserve debugging statements. >I don't see anything wrong with the baud rate calculation. >The C code thinks it is 9600, the SerialRX instance is >told 9600 baud. If one pin isn't even noticing the other, these little details don't matter much. >The CPU frequency (4000000) is set in one place in the >Makefile.am and passed to both the simulator run and the >build. Is the parity the same? -- Michael Hennebry [email protected] "War is only a hobby." ---- Msg sent via CableONE.net MyMail - http://www.cableone.net _______________________________________________ Simulavr-devel mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/simulavr-devel
