> -----Original Message-----
> From: Arunachalam Venkatraman [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 23, 2001 3:39 PM
> To: [EMAIL PROTECTED]
> Cc: Jonathan Rosenberg
> Subject: Replace Contact in Route set ?
>
> As per the protocol, the Contact header is added to the end of the Route
header.
>
> Suppose a Record-Route was first received in a message with a Contact C1.
> The UA has built a route set with the Contact C1 at the bottom of the
Route.
>
> If the next request to the UA has a new Contact C2, should C1 in the Route
Set be replaced
> with C2?
>
Yes. And if there was no Contact, don't change anything.
Note that if the next request has new record-routes, those do NOT update the
existing route sets.
-Jonathan R.
---
Jonathan D. Rosenberg 72 Eagle Rock Ave.
Chief Scientist First Floor
dynamicsoft East Hanover, NJ 07936
[EMAIL PROTECTED] FAX: (973) 952-5050
http://www.cs.columbia.edu/~jdrosen PHONE: (973) 952-5000
http://www.dynamicsoft.com
_______________________________________________
Sip-implementors mailing list
[EMAIL PROTECTED]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
